2.1 kernels on SX164?

[Don Crimbchin <djc2 andrew cmu edu>]

Is it possible to use a 2.1 kernel on an SX164?  I compiled 2.1.103, and
when MILO attempted to load it, it gave me soemthing like this:

  Attempted to access beyond end of device
  03:02: rw=0, want=2145796137, limit=2991305
  block_read: read failed (after 0 bytes)
  ext2_iget: read error
  MILO:  failed to load the kernel
  MILO>


I was using the same MILO image that I had used to load my 2.0.33
kernel. Do I need to have a newer image?  I don't know where to find
one, and when I tried to rebuild from MILO sources, I got this:


/usr/src/milo-2.1.13: make KSRC=/usr/src/linux config
/bin/sh Configure config.in
*
* Alpha Linux Miniloader setup
*
Echo output to the serial port (MINI_SERIAL_ECHO) [y] 
Use Digitals BIOS emulation code (not free) (MINI_DIGITAL_BIOSEMU) [n] 
Build PALcode from sources (Warning this is dangerous)
(MINI_BUILD_PALCODE_FROM_SOURCES) [n] 

The Alpha Linux Miniloader is now hopefully configured for your setup.

/usr/src/milo-2.1.13: make KSRC=/usr/src/linux
gcc -D__KERNEL__  -D__linux__ -E -DPALCODE_AT=0xfffffc0000200000
-DLOADER_AT=0xfffffc0000500000 -DSTUB_AT=0xfffffc0000210000
-DDECOMP_PALBASE=0x300000 -DDE
COMP_BASE=0x300B00 -DPALCODE_SIZE=0x10000 -DLOADER_SIZE=0x20000   
-D__ASSEMBLY__ -I. -Ix86 -Ifs -I/usr/src/linux/include -I/usr/src/linux
-I/ micropal.S >
 micropal.i
as  -o micropal.o micropal.i
micropal.S: Assembler messages:
micropal.S:229: Error: inappropriate arguments for opcode `br'
micropal.S:299: Error: inappropriate arguments for opcode `bis'
micropal.S:306: Error: inappropriate arguments for opcode `bis'
micropal.S:308: Error: syntax error
micropal.S:310: Error: inappropriate arguments for opcode `srl'
micropal.S:311: Error: inappropriate arguments for opcode `sll'
micropal.S:313: Error: inappropriate arguments for opcode `bis'
micropal.S:314: Error: inappropriate arguments for opcode `bis'
micropal.S:319: Error: inappropriate arguments for opcode `bis'
micropal.S:320: Error: inappropriate arguments for opcode `lda'
micropal.S:359: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:360: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:361: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:362: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:363: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:364: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:365: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:366: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:367: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:368: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:369: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:370: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:371: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:372: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:373: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:374: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:375: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:376: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:377: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:378: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:379: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:380: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:381: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:382: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:383: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:384: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:385: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:386: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:387: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:388: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:389: Error: opcode `hw_stq/p' not supported for target <all>
micropal.S:397: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:402: Error: inappropriate arguments for opcode `cmpeq'
micropal.S:406: Error: inappropriate arguments for opcode `bis'
micropal.S:408: Error: inappropriate arguments for opcode `subq'
micropal.S:409: Error: inappropriate arguments for opcode `subq'
micropal.S:410: Error: inappropriate arguments for opcode `cmovlt'
micropal.S:411: Error: inappropriate arguments for opcode `cmple'
micropal.S:413: Error: inappropriate arguments for opcode `cmplt'
micropal.S:414: Error: inappropriate arguments for opcode `subq'
micropal.S:415: Error: inappropriate arguments for opcode `subq'
micropal.S:416: Error: inappropriate arguments for opcode `cmovlbs'
micropal.S:418: Error: inappropriate arguments for opcode `addq'
micropal.S:419: Error: inappropriate arguments for opcode `addq'
micropal.S:420: Error: inappropriate arguments for opcode `cmovlbc'
micropal.S:424: Error: inappropriate arguments for opcode `bis'
micropal.S:425: Error: syntax error
micropal.S:426: Error: inappropriate arguments for opcode `subq'
micropal.S:427: Error: syntax error
micropal.S:428: Error: inappropriate arguments for opcode `addq'
micropal.S:429: Error: inappropriate arguments for opcode `addq'
micropal.S:441: Error: unknown opcode `mtpr'
micropal.S:442: Error: unknown opcode `stall'
micropal.S:443: Error: unknown opcode `stall'
micropal.S:444: Error: unknown opcode `stall'
micropal.S:445: Error: unknown opcode `stall'
micropal.S:446: Error: unknown opcode `stall'
micropal.S:447: Error: unknown opcode `stall'
micropal.S:448: Error: unknown opcode `stall'
micropal.S:452: Error: inappropriate arguments for opcode `bis'
micropal.S:457: Error: inappropriate arguments for opcode `addq'
micropal.S:458: Error: inappropriate arguments for opcode `bic'
micropal.S:459: Error: syntax error
micropal.S:466: Error: inappropriate arguments for opcode `bis'
micropal.S:471: Error: inappropriate arguments for opcode `bis'
micropal.S:473: Error: unknown opcode `mtpr'
micropal.S:474: Error: unknown opcode `stall'
micropal.S:475: Error: unknown opcode `stall'
micropal.S:476: Error: unknown opcode `stall'
micropal.S:477: Error: unknown opcode `stall'
micropal.S:483: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:484: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:485: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:486: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:487: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:488: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:489: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:490: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:491: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:492: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:493: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:494: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:495: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:496: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:497: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:498: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:499: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:500: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:501: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:502: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:503: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:504: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:505: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:506: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:507: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:508: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:509: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:511: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:512: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:513: Error: opcode `hw_ldq/p' not supported for target <all>
micropal.S:520: Error: unknown opcode `stall'
micropal.S:521: Error: unknown opcode `stall'
micropal.S:539: Error: unknown opcode `stall'
micropal.S:540: Error: unknown opcode `stall'
micropal.S:541: Error: unknown opcode `stall'
micropal.S:542: Error: unknown opcode `stall'
micropal.S:543: Error: unknown opcode `stall'
micropal.S:544: Error: unknown opcode `stall'
micropal.S:545: Error: unknown opcode `stall'
micropal.S:546: Error: unknown opcode `stall'
micropal.S:547: Error: unknown opcode `stall'
micropal.S:548: Error: unknown opcode `stall'
micropal.S:549: Error: opcode `hw_rei' not supported for target <all>
make: *** [micropal.o] Error 1



So, if I need a newer MILO image to boot this kernel, where would I find
one or how would I build one?

Donald Crimbchin
djc2@andrew.cmu.edu