[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
RE: AS200 install
- From: Eric Cifreo <Eric kazan com>
- To: axp-list redhat com
- Subject: RE: AS200 install
- Date: Wed, 30 Sep 1998 08:36:48 -0500
> Caveats:
> Make sure you have at least 32M of RAM. I had to buy more to install.
> Partition your drives smaller than 2 G apiece.
> Still figuring out external modems. Get back to you on that one.
Why must the partitions be smaller than 2gigs? I have a 4gig partition
and it works well.
++Because the installer was hanging when formatting partitions larger
++than 2 G. _After_ installation, you can add them as large as you like.
External modems are just like intel systems.
I copied my ppp files over from my intel machine and connected the
modem up and it worked. I did nothing special.
++Yes the config files are the same mostly. But, the connect speeds
++of 57600 and 115200 simply do not fly on my AS200 with USR Sportster
++combo. I had to change it to 38400 and it then worked (thanks again
++to Mssr. Sturrock 8))
Good luck
Alan
++Eric Cifreo
++Austin, TX
[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
[]