Just finished configuring an ES40 that I'm hoping to start doing some "real" performance work on today. I tried building and installing 2.3.29, 2.3.30-pre3, and 2.3.30-pre3+Andrea's Alpha patches...all hung at the same point in the boot sequence. I'm appending what was left on the screen from the boot - if you need a full boot log, please let me know and I'll boot with a serial console. The only difference between this log (of 2.3.29) and those of 2.3.30-pre3 is that the "Memory: XXXX available" part looks more correct on the others.
Things to note: 4x 667 MHz EV67 CPUs, 4 GB Mem (4 x 1 GB modules), builtin IDE CD, all other disks are off of QLogic 1040B and 1020 adapters and a pair of Symbios Logic 53c875s, with a 21140 Tulip ethernet adapter. *phew*...think that's everything ;) Thanks!
- Pete
Boot log:
zone(1) 0 pages.
zone(2) 0 pages.
Console: colour VGA+ 80x25
Calibrating delay loop... 652.21 BogoMIPS
Memory: 249k available
Buffer-cache hash table entries: 131072 (order: 7, 1048576 bytes)
Page-cache hash table entries: 262144 (order: 8, 2097152 bytes)
SMP starting up secondaries.
recv_secondary_console_msg: on 0 message is 'P01>>>START P01>>>'
Calibrating delay loop... 652.21 BogoMIPS
recv_secondary_console_msg: on 0 message is 'P02>>>START P02>>>'
Calibrating delay loop... 652.21 BogoMIPS
recv_secondary_console_msg: on 0 message is 'P03>>>START P03>>>'
Calibrating delay loop... 652.21 BogoMIPS
SMP: Total of 4 processors activated (2608.86 BogoMIPS).
PCI: Address space collision on region 1 of device Acer Laboratories
Inc. (ALi) M5229 IDE
PCI: Address space collision on region 2 of device Acer Laboratories
Inc. (ALi) M5229 IDE
PCI: Address space collision on region 3 of device Acer Laboratories
Inc. (ALi) M5229 IDE
PCI: Address space collision on region 4 of device Acer Laboratories
Inc. (ALi) M5229 IDE
...and then hung solid - even halt button doesn't work, have to use the reset button...