[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[no subject]



Feb 13 20:38:01 server kernel: ncr53c8xx: at PCI bus 1, device 9,
function 0
Feb 13 20:38:01 server kernel: ncr53c8xx: 53c875J detected
Feb 13 20:38:01 server kernel: ncr53c875J-0: rev=0x04, base=0xb100000,
io_port=0x9000, irq=40
Feb 13 20:38:01 server kernel: ncr53c875J-0: ID 7, Fast-20, Parity
Checking
Feb 13 20:38:01 server kernel: ncr53c875J-0: on-chip RAM at 0xb101000
Feb 13 20:38:01 server kernel: ncr53c875J-0: restart (scsi reset).
Feb 13 20:38:01 server kernel: ncr53c875J-0: copying script fragments
into the on-chip RAM ...
Feb 13 20:38:01 server kernel: scsi0 : ncr53c8xx - revision 2.6n
Feb 13 20:38:01 server kernel: scsi : 1 host.
Feb 13 20:38:01 server kernel:   Vendor: COMPAQPC  Model:
DDRS-34560W       Rev: S95E
Feb 13 20:38:01 server kernel:   Type:
Direct-Access                      ANSI SCSI revision: 02
Feb 13 20:38:01 server kernel: Detected scsi disk sda at scsi0, channel
0, id 0, lun 0
Feb 13 20:38:01 server kernel:   Vendor: PIONEER   Model: CD-ROM
DR-U03S    Rev: 1.01
Feb 13 20:38:01 server kernel:   Type:
CD-ROM                             ANSI SCSI revision: 02
Feb 13 20:38:01 server kernel: Detected scsi CD-ROM sr0 at scsi0,
channel 0, id 2, lun 0
Feb 13 20:38:01 server kernel:   Vendor: DEC       Model: TLZ06
(C)DEC  Rev: 4BQE
Feb 13 20:38:01 server kernel:   Type:
Sequential-Access                  ANSI SCSI revision: 02
Feb 13 20:38:01 server kernel:   Vendor: FUJITSU   Model:
MAB3045SP         Rev: 0109
Feb 13 20:38:01 server kernel:   Type:
Direct-Access                      ANSI SCSI revision: 02
Feb 13 20:38:01 server kernel: Detected scsi disk sdb at scsi0, channel
0, id 8, lun 0
Feb 13 20:38:01 server kernel: scsi : detected 1 SCSI cdrom 2 SCSI disks
total.
Feb 13 20:38:01 server kernel: ncr53c875J-0-<0,0>: FAST-5 WIDE SCSI 10.0
MB/s (200 ns, offset 15)
Feb 13 20:38:01 server kernel: SCSI device sda: hdwr sector= 512 bytes.
Sectors= 8386000 [4094 MB] [4.1 GB]
Feb 13 20:38:01 server kernel: ncr53c875J-0-<8,0>: FAST-5 WIDE SCSI 10.0
MB/s (200 ns, offset 16)
Feb 13 20:38:01 server kernel: SCSI device sdb: hdwr sector= 512 bytes.
Sectors= 8895370 [4343 MB] [4.3 GB]

I see a  ncr53c875J-0-<8,0>, is that it?

I am using a Diamond Fireport 40 and using the following in the config:

#
# SCSI support
#
CONFIG_SCSI=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_NCR53C7xx=y
# CONFIG_SCSI_NCR53C7xx_sync is not set
CONFIG_SCSI_NCR53C7xx_FAST=y
# CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set



What could I be doing wrong?

Thanks

Geoff



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index] []