[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
RE: DE-422 Ethernet on Jensen
- From: "Champigny, Michael" <Michael Champigny compaq com>
- To: "'axp-list redhat com'" <axp-list redhat com>
- Subject: RE: DE-422 Ethernet on Jensen
- Date: Thu, 28 Oct 1999 09:30:50 -0400
Unfortunately, the old 1.7 firmware on the Jensen
doesn't have the ew* environment variables. :-(
Thanks though!
/Michael
-----Original Message-----
From: Ezolt, Phillip
Sent: Thursday, October 28, 1999 8:38 AM
To: axp-list@redhat.com
Subject: Re: DE-422 Ethernet on Jensen
If you are on a 10baseT network, try typing:
"set ewa0_mode TwistedPair" at the SRM prompt.
See if this helps.
--Phil
Compaq: High Performance Server Division/Benchmark Performance Engineering
---------------- Alpha, The Fastest Processor on Earth --------------------
Phillip.Ezolt@compaq.com |C|O|M|P|A|Q| ezolt@perf.zko.dec.com
On Wed, 27 Oct 1999, Tom Everett wrote:
> For what it's worth, I have that same hang when I try to bring up my
DE-422.
>
> If you come upon a solution, I'm sure you and I are not the only two who
> would like to know about it.
>
>
>
> "Champigny, Michael" wrote:
>
> > Does anyone have experience using a DE-422 Ethernet card on the
> > Jensen? The Jensen hangs when I try to bring the Ethernet card up,
> > however, the kernel recognizes it and the IRQ and I/O do not conflict
> > with anything else are are visible from /proc filesystem.
> >
> > I think the problem is either the jumper is wrong (ie. don't know
whether
> > it's using the BNC or UTP connector) or I need to set something up
> > in SRM (I seem to recall this is what's required but don't know the
> > specifics).
> >
> > If anyone can help me to get this going, I'd appreciate it.
> >
> > Thanks,
> >
> > Michael
> >
> > --
> > To unsubscribe: send e-mail to axp-list-request@redhat.com with
> > 'unsubscribe' as the subject. Do not send it to axp-list@redhat.com
>
> --
> To unsubscribe: send e-mail to axp-list-request@redhat.com with
> 'unsubscribe' as the subject. Do not send it to axp-list@redhat.com
>
>
>
--
To unsubscribe: send e-mail to axp-list-request@redhat.com with
'unsubscribe' as the subject. Do not send it to axp-list@redhat.com
[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
[]