Re: Multia and PCI slot

[Pierre-Yves Andri <unilogic tvd be>]

> > ARC firmware reports the presence of an ethernet card on slot 12, but 
> Linux
> > doesn't see anything. (Have tried several cards).
> > (NB. the on-board ethernet is working, but I need a second one)
> >
>
> Are you passing the kernel the correct "ether=" argument at boot time?
> Check the Ethernet-HOWTO for more info.
>
> --
> Ryan Schaefer
> lars@execpc.com

Thank you for that...
I didn't know that Linux, by default, scan only for one ethernet !
Specifying "ether=0,0,eth1" as MILO parameters fixed the problem.

--
 Pierre-Yves Andri               UniLogic
 Av. Paul Deschanel, 229         phone : +32(2)245 89 05
 B-1030 Brussels                 fax   : +32(2)245 32 99
 BELGIUM                         email :  unilogic@tvd.be