[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
Re: 164SX H/W question
- From: "Alexander S. Guy" <alex luxlucis com>
- To: Larry Snyder <larrys lexis-nexis com>
- Cc: axp-list redhat com
- Subject: Re: 164SX H/W question
- Date: Mon, 06 Sep 1999 14:22:25 -0700
>>>>> "Larry" == Larry Snyder <larrys@lexis-nexis.com> writes:
Larry> Is pin 1 on the ribbon header connectors toward or away
Larry> from the power connector. I didn't see any obvious
Which connectors? _Most_of_the_time_ pin one (usually marked red
on the ribbon) is towards the power.
Larry> markings. Also, is J20 (the multipurpose connector)
Larry> counted from the cpu edge of the board? Ohm- meter checks
Larry> seem to suggest so (and likewise that the ribbons count
Larry> from the end away from the power jack). I'm just paranoid
Larry> enough to want confirmation before I fire it up.
Nod. Which edge? ;) If you hold the motherboard, with the 21164 socket
away from you and the ``ATX'' edge connectors towards you, J20 starts counting
from the far edge (i.e. the upper left corner of J20 is pin 1, the upper
right corner is pin 2).
I hope this helps... BTW, check out:
http://www.digital.com/semiconductor/alpha/dsc-pc164sx.html
That has links to all the information (I think) you could want about the 164SX.
Alexander
[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
[]