UP1000: Promise UDMA card IRQ conflicts?

[Robert Williams <bob bob usuhs mil>]

When I plug a Promise UDMA66 card +disk into
my UP1000, the card is not listed in /proc/ ide,
the disk is not available to the system,
and there appears to be an IRQ conflict.
Should /proc/pci report IRQ 5 for both the VGA
and ide controllers?

Here is /proc/pci:

  Bus  0, device   8, function  0:
    VGA compatible controller: S3 Inc. Trio64V2/DX or /GX (rev 22).
      Medium devsel.  IRQ 5.
      Non-prefetchable 32 bit memory at 0x40000000 [0x40000000].
  Bus  0, device  11, function  0:
    Unknown mass storage controller: Promise Technology IDE UltraDMA/66 (rev 1).

      Medium devsel.  IRQ 5.  Master Capable.  Latency=32.
      I/O at 0x101c0 [0x101c1].
      I/O at 0x101d4 [0x101d5].
      I/O at 0x101c8 [0x101c9].
      I/O at 0x101d8 [0x101d9].
      I/O at 0x10180 [0x10181].
      Non-prefetchable 32 bit memory at 0x44080000 [0x44080000].

Here is /proc/interrupts:

  1:        202    keyboard
  8:     853604    timer
 10:      21366    eth0
 11:          4    eth1
 12:          0    PS/2 Mouse
 14:         57   +ide0
 15:     151079   +ide1



--
Bob Williams, http://bob.usuhs.mil/
office: 301-295-3568