modules.conf

[James Fowler <santiago cx908962-l mesa1 az home com>]

Stupid user question:
I am having problems getting my modules loaded.  I have them all listed in
my /etc/modules.conf.  I modeled it on the docs available on ALO.  For
some reason I still can't get them to load.  I am running a 2.4.1 kernel
on a PWS433.  RH6.1 plus updates.  Any ideas?  Attached is my
modules.conf.  TIA.
James

-- 
James Fowler
jamesf@sequoia.net
ICQ: 81445515

"Thinking implies disagreement; and disagreement implies non-comformity; and non-comformity
implies heresy; and heresy implies disloyality -- so obviously thinking must be stopped"
[Call to Greatness, 1954] -- Adlai Stephenson

alias eth0 de4x5
# alias parport_lowlevel parport_pc
# alias eth1 tulip
# alias scsi_hostadapter qlogicisp
# alias tulip eth0 
#	options tulip options=14
# alias binfmt-17791 binfmt_em86
# alias binfmt-464c  binfmt_em86
# alias binfmt-0008  binfmt_aout

# parallel port
alias parport_lowlevel parport_pc
options parport_pc io=0x3BC irq=none

# sound config
alias sound sb
pre-install sound insmod sound dmabuf-1
alias midi op13
options op13 io=0x388
options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330

# binary formats
alias binfmt-17791 binfmt_em86
alias binfmt-464c  binfmt_em86
alias binfmt-0008  binfmt_aout

# SCSI adapters
alias scsi_hostadapter qlogicisp