[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
Re: S3 928 video card on Jensen
- From: "Alexey Chupakhin" <achupahi uic rsu ru>
- To: <axp-list redhat com>
- Subject: Re: S3 928 video card on Jensen
- Date: Wed, 28 Mar 2001 18:53:40 +0400
What is your firmware version?
May be, latest 2.2 will work for you.
I never see the setuation you haven, mine cards will work both under ARC and
SRM consoles, or neither SRM no ARC, but I'm hear that SRM does not supports
number of cards as ARC BIOS emulation.
BTW, try to load ECU utility and install standard VGA card to appropriate
position.
regards,
Alexey
----- Original Message -----
From: Luiz Emediato <thooft2002@hotmail.com>
To: <axp-list@redhat.com>
Sent: Tuesday, March 27, 2001 10:47 PM
Subject: Re: S3 928 video card on Jensen
> Hi Alexey,
>
> I tested the S3 928 Diamond Stealth Pro ISA and here are the results:
> 1. using ARC firmware (NT boot), the video card BIOS is displayed, I get
the
> regular firmware menu, ECU reconfiguration is fine using
> config for "Standard VGA video" (PHI...cfg). WinNT4 runs just fine.
> 2. now, switching to OSF1 things are bad: after power-cycling the machine
> the image is lost, that is, I can not see neither Diamond BIOS nor SRM
> messages.
> Then, to return to ARC I typed:
>
> q (if at aboot prompt)
> halt (if at srm prompt)
> set os_type nt
>
> and power-cycle the machine again to obtain ARC menu.
> Do you know why there are such differences between ARC and SRM video
> configurations?
>
> thanks
> Luiz
>
>
> >From: "Alexey Chupakhin" <achupahi@uic.rsu.ru>
> >Reply-To: axp-list@redhat.com
> >To: <axp-list@redhat.com>
> >Subject: Re: S3 928 video card on Jensen
> >Date: Sat, 24 Mar 2001 08:32:27 +0300
> >
> >It is required to test it :-)
> >
> >I have an SPEA v7 S3 801 based card, but don't work on Linux/Jensen.
> >
> >regards,
> >Alexey
> >----- Original Message -----
> >From: Luiz Emediato <thooft2002@hotmail.com>
> >To: <axp-list@redhat.com>
> >Sent: Friday, March 23, 2001 4:47 AM
> >Subject: S3 928 video card on Jensen
> >
> >
> > > Hi
> > >
> > > Does anyone know if a video board S3 928 Diamond Stealth Pro ISA
> > > would work on the Alpha Jensen ?
> > > It seems okay on the NT boot, but it is not okay on OSF1.
> > >
> > > Thanks in advance,
> > > Luiz
> > > _________________________________________________________________
> > > Get your FREE download of MSN Explorer at http://explorer.msn.com
> > >
> > >
> > >
> > > _______________________________________________
> > > Axp-list mailing list
> > > Axp-list@redhat.com
> > > https://listman.redhat.com/mailman/listinfo/axp-list
> >
> >
> >
> >_______________________________________________
> >Axp-list mailing list
> >Axp-list@redhat.com
> >https://listman.redhat.com/mailman/listinfo/axp-list
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
>
>
>
> _______________________________________________
> Axp-list mailing list
> Axp-list@redhat.com
> https://listman.redhat.com/mailman/listinfo/axp-list
[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
[]