RE: USB on alpha164lx

["Peter Petrakis" <voodoo alphadriven org>]

Wasnt that fixed by hardcoding the IRQ value in the driver itself?
It was IRQ 10 I think. Linux doesn't honor what SRM says anyways.
The functionality is on the southbridge it just needs to be mapped.
I don't know why this isn't part of the DP264 hostdef as an option.
See,
http://www.lib.uaa.alaska.edu/axp-list/archive/2001-05/0075.html

Peter
--
www.linuxalpha.org	www.alphadriven.org
Peter Petrakis         Warrior/Engineer        voodoo@alphadriven.org
"<BLAM!!> Who the hell are you!? Name's Ash <click clock> Housewares..."


> -----Original Message-----
> From: axp-list-admin@redhat.com [mailto:axp-list-admin@redhat.com]On
> Behalf Of Robert M. Riches Jr.
> Sent: Sunday, February 24, 2002 9:17 PM
> To: axp-list@redhat.com
> Subject: Re: USB on alpha164lx
> 
> 
> > From: "Ted Goodridge, Jr" <tedgoodridgejr@acm.org>
> > Date: Sun, 24 Feb 2002 18:59:37 -0600
> >
> > Has anyone gotten USB to work with alpha linux?
> >
> > I'm trying to get an O-UHCI driver to work, it sees the hub and
> > everything, but can't allocate the IRQ for any devices.
> 
> I don't know how relevant this is to your hardware, but at
> least on a UP2000, a USB PCI card works, but the built-in
> USB ports don't.  According to the fine folks at Harddata,
> SRM does not properly initialize the UP2000's built-in
> ports, largely in the area of assigning an IRQ to the USB
> adapter.  There has been some mention that it _might_ be
> possible to manually configure them from the SRM command
> line.  In my case, a 5-port PCI card replaced the SCSI card
> I was using for the scanner, and the scanner then used USB,
> and both printers could then go to USB, which made me happy.
> 
> Good luck.
> 
> Robert Riches
> richesr1@inetarena.com
> 
> 
> 
> _______________________________________________
> Axp-list mailing list
> Axp-list@redhat.com
> https://listman.redhat.com/mailman/listinfo/axp-list
> 
>