Re: which way to orient an IDE cable on an LX164

[Alan Young <ayoung teleport com>]

On the LX, Pin 1 is on the side nearest to the PCI slots.  On the board next to the
connector there's a tiny "1" to indicate where PIN 1 is.  Connect the IDE cable
so that the stripe on the cable is on the same side as the "1".

Alan

P.S. The CMD 646 IDE chip that is on the board is a horribly slow chip.

On Tue, 10 May 2005 20:23:27 -0500 "Ted Goodridge, Jr"
<tedgoodridgejr acm org> wrote:

> I found the IDE connectors, but as there is no notch I was curious to know  
> which side the red stripe goes on withi the chip oriented above the IDE  
> connectors.  I'm offlist so please CC me directly.
> 
> Thanks,
> Ted
> 
> _______________________________________________
> axp-list mailing list
> axp-list redhat com
> https://www.redhat.com/mailman/listinfo/axp-list