[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]
RE: [dm-devel] [ANNOUNCE] multipath-tools-0.4.1
- From: "Caushik, Ramesh" <ramesh caushik intel com>
- To: "device-mapper development" <dm-devel redhat com>
- Cc: linux-raid vger kernel org, linux-hotplug-devel lists sourceforge net, linux-scsi vger kernel org
- Subject: RE: [dm-devel] [ANNOUNCE] multipath-tools-0.4.1
- Date: Wed, 22 Dec 2004 13:54:45 -0800
The newer Qlogic (qla2xxx) driver for kernel versions 2.6.9 and later do not support the fc_transport class. The support is #ifdefed for kernels > 2.6.6 & < 2.6.9. So I will have to wait till they support this for newer kernels. Meanwhile I can work with a patched version of multipath tools. Thanks for feedback.
Ramesh.
-----Original Message-----
From: dm-devel-bounces redhat com [mailto:dm-devel-bounces redhat com] On Behalf Of christophe varoqui
Sent: Wednesday, December 22, 2004 3:31 PM
To: device-mapper development
Cc: linux-raid vger kernel org; linux-hotplug-devel lists sourceforge net; linux-scsi vger kernel org
Subject: RE: [dm-devel] [ANNOUNCE] multipath-tools-0.4.1
James, thank you for the clarification (and I didn't mean to string
anyone :).
Ramesh, I don't feel like going through the hassle of supporting
multiple synthax until the multipath target has made its way into the
standard kernel, so I'll keep guessing the node_name in
behing /sys/class/fc_transport/target<host>:<channel>:<target> or skip
the node_name fetch.
ok with you ?
regards,
cvaroqui
Le mercredi 22 d?embre 2004 à 16:05 -0500, James Smart Emulex Com a
écrit :
> Qlogic shouldn't be strung out. It wasn't them....
>
> As part of a change that went into the FC transport - the device reported under this directory was moved from the LUN device to the Target device - thus the change in name format (it killed replication of target data that was being done for all luns). The attributes underneath remain the same. I believe this change occurred in the first rc1 patch to 2.6.9.
>
> As to the grand plan - you should be fine if you :
> pre-2.6.10: it's the older name format "/sys/class/fc_transport/<host>:<channel>:<target>:<lun>"
> 2.6.10 and later : it's the new format "/sys/class/fc_transport/target<host>:<channel>:<target>"
>
> and the folks running a patched 2.6.9 have to live by the new format.
>
> --
--
dm-devel mailing list
dm-devel redhat com
https://www.redhat.com/mailman/listinfo/dm-devel
[Date Prev][Date Next] [Thread Prev][Thread Next]
[Thread Index]
[Date Index]
[Author Index]