[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: [dm-devel] scsi errors



If you enable error logging in the driver then we can get a little more information about the issue. If you are using 8-series driver then uncomment "/* #define QL_DEBUG_LEVEL_2  */" in the qla_dbg.h file. 
- Duane

> -----Original Message-----
> From: dm-devel-bounces redhat com 
> [mailto:dm-devel-bounces redhat com]On
> Behalf Of Arthur Bergman
> Sent: Friday, January 07, 2005 4:47 AM
> To: device-mapper development
> Subject: [dm-devel] scsi errors
> 
> 
> I am getting a lot of scsi errors after a 24 hour burn time,
> 
> Cards are QLA2312 cards in a blade, any suggestions on how to debug 
> this more?
> 
> SCSI error : <0 0 2 0> return code = 0x20000
> end_request: I/O error, dev sde, sector 9706656
> end_request: I/O error, dev sde, sector 9706664
> SCSI error : <0 0 0 0> return code = 0x20000
> end_request: I/O error, dev sda, sector 9709632
> end_request: I/O error, dev sda, sector 9709640
> SCSI error : <0 0 0 0> return code = 0x20000
> end_request: I/O error, dev sda, sector 9711512
> end_request: I/O error, dev sda, sector 9711520
> SCSI error : <0 0 0 0> return code = 0x20000
> 
> A reboot makes it work again.
> 
> Cheers
> Arthur
> -----
> CTO @ Fotango Ltd
> +447834716919
> http://www.fotango.com/
> 
> --
> dm-devel mailing list
> dm-devel redhat com
> https://www.redhat.com/mailman/listinfo/dm-devel
> 


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]