September 2005 Archives by author
Starting: Thu Sep 1 04:46:05 UTC 2005
Ending: Fri Sep 30 23:07:04 UTC 2005
Messages: 111
- [dm-devel] blacklisted paths?
Mike Anderson
- [dm-devel] Re: blacklisted paths?
Mike Anderson
- [dm-devel] [PATCH] kernel-2.6.13 queue_if_no_path feature is ignored on creation
Stefan Bader
- [dm-devel] [multipath-tools] multipath -ll and offline devices
Stefan Bader
- [dm-devel] [multipath-tools] multipath -ll and offline devices
Stefan Bader
- [dm-devel] [multipath-tools][PATCH] two small fixes
Stefan Bader
- [dm-devel] [multipath-tools][PATCH] two small fixes
Stefan Bader
- [dm-devel] [PATCH] multipath-tools/kpartx - fix endianes, undefined behaviour, cleanup
Bastian Blank
- [dm-devel] [PATCH] multipath-tools/kpartx - loop support
Bastian Blank
- [dm-devel] [PATCH] multipath-tools/kpartx - fix endianes, undefined behaviour, cleanup
Bastian Blank
- [dm-devel] [PATCH] multipath-tools/kpartx - loop support
Bastian Blank
- [dm-devel] [PATCH] multipath-tools/kpartx - fix endianes, undefined behaviour, cleanup
Bastian Blank
- [dm-devel] PATCH - pvmove doesn't terminate sometimes on 64-bit bigendian machines
Neil Brown
- [dm-devel] PATCH - multipath UUID
Patrick Caulfield
- [dm-devel] Re: [RFC PATCH 2/4] convert dm to blkerr error values
Mike Christie
- [dm-devel] Re: [RFC PATCH 4/4] convert scsi to blkerr error values
Mike Christie
- [dm-devel] Re: [RFC PATCH 4/4] convert scsi to blkerr error values
Mike Christie
- [dm-devel] RE: [RFC PATCH 4/4] convert scsi to blkerr error values
Mike Christie
- [dm-devel] Re: [RFC PATCH 4/4] convert scsi to blkerr error values
Mike Christie
- [dm-devel] RE: [RFC PATCH 4/4] convert scsi to blkerr error values
Mike Christie
- [dm-devel] RE: [RFC PATCH 4/4] convert scsi to blkerr error v alues
Mike Christie
- [dm-devel] [PATCH RFT/RFC 0/4] add hp sw hw_handler
Mike Christie
- [dm-devel] [PATCH RFT/RFC 1/4] export block layer helpers
Mike Christie
- [dm-devel] [PATCH RFT/RFC 2/4] add dm_scsi helpers
Mike Christie
- [dm-devel] [PATCH RFT/RFC 3/4] convert dm emc
Mike Christie
- [dm-devel] [PATCH RFT/RFC 4/4] add dm-hp-sw hw handler
Mike Christie
- [dm-devel] [PATCH RFT/RFC 2/4] add dm_scsi helpers
Mike Christie
- [dm-devel] [PATCH RFT/RFC 4/4] add dm-hp-sw hw handler
Mike Christie
- [dm-devel] [PATCH RFT/RFC 4/4] add dm-hp-sw hw handler
Mike Christie
- [dm-devel] [PATCH] Add I/O stats for DM devices
Kevin Corry
- [dm-devel] multipath tools 0.4.5 bug?
Brad Dameron
- [dm-devel] multipath tools 0.4.5 bug?
Brad Dameron
- [dm-devel] How about shortening SCSI timeout value dynamically?
James.Smart at Emulex.Com
- [dm-devel] Progress on LVM2 snapshots - kernel 2.6.x
Hubert
- [dm-devel] Dmsetup snapshot create/remove procedure and latest status with 2.6.x kernel series
Hubert
- [dm-devel] [PATCH RFT/RFC 4/4] add dm-hp-sw hw handler
Rob Kenna
- [dm-devel] mpath_ctl observation + some novice questions
Alasdair G Kergon
- [dm-devel] lvm - No matching physical volumes found
Alasdair G Kergon
- [dm-devel] PATCH - pvmove doesn't terminate sometimes on 64-bit bigendian machines
Alasdair G Kergon
- [dm-devel] [PATCH] kernel-2.6.13 queue_if_no_path feature is ignored on creation
Alasdair G Kergon
- [dm-devel] PATCH - pvmove doesn't terminate sometimes on 64-bit bigendian machines
Alasdair G Kergon
- [dm-devel] [PATCH] multipath-tools/kpartx - loop support
Alasdair G Kergon
- [dm-devel] Cluster dilemas...
Piotr Kral
- [dm-devel] ioctl failed when parted operated on device activebydmraid?
Lin, Weichuan
- [dm-devel] RAID 5 support?
Jane Liu
- [dm-devel] FW: How to avoid lots of read ios to passive paths of active-pass ive storage devices?
Steve Lord
- [dm-devel] *** Announcement: dmraid 1.0.0.rc9 ***
Heinz Mauelshagen
- [dm-devel] RAID 5 support?
Heinz Mauelshagen
- [dm-devel] Clariion configuration with multi-path tools
Richard J Moore
- [dm-devel] Fw: [Bug 5297] New: Memory problem with kcopyd under LVM2 lvremove execution and copying data at the same time.
Andrew Morton
- [dm-devel] multipath info: wwid
Nicola Murino
- [dm-devel] EMC CX 300 multipath problem
Nicola Murino
- [dm-devel] EMC Cx300 multipath seems to work
Nicola Murino
- [dm-devel] Re: EMC Cx300 multipath seems to work
Nicola Murino
- [dm-devel] [SUMMARY] My EMC CX300 and multipath-tools setup
Nicola Murino
- [dm-devel] Re: Clariion configuration with multi-path tools
Nicola Murino
- [dm-devel] queue size
Murthy, Narasimha Doraswamy (STSD)
- [dm-devel] Dmsetup snapshot create/remove procedure and latest status with 2.6.x kernel series
Lee Rocky
- [dm-devel] mpath_ctl observation + some novice questions
Ray Stell
- [dm-devel] mpath_ctl observation + some novice questions
Ray Stell
- [dm-devel] lvm - No matching physical volumes found
Ray Stell
- [dm-devel] blacklisted paths?
Ray Stell
- [dm-devel] Re: blacklisted paths?
Ray Stell
- [dm-devel] Re: blacklisted paths?
Ray Stell
- [dm-devel] adding luns
Ray Stell
- [dm-devel] [Fwd: Multipath Tools.]
Mike Tran
- [dm-devel] [RFC][multipath-tools] device nodes
Christophe Varoqui
- [dm-devel] Re: [RFC][multipath-tools] device nodes
Christophe Varoqui
- [dm-devel] [multipath-tools] multipath -ll and offline devices
Christophe Varoqui
- [dm-devel] [multipath-tools] multipath -ll and offline devices
Christophe Varoqui
- [dm-devel] [PATCH] multipath-tools/kpartx - fix endianes, undefined behaviour, cleanup
Christophe Varoqui
- [dm-devel] [PATCH] multipath-tools/kpartx - fix endianes, undefined behaviour, cleanup
Christophe Varoqui
- [dm-devel] [PATCH] multipath-tools/kpartx - fix endianes, undefined behaviour, cleanup
Christophe Varoqui
- [dm-devel] PATCH - multipath UUID
Christophe Varoqui
- [dm-devel] [PATCH] multipath-tools/kpartx - fix endianes, undefined behaviour, cleanup
Christophe Varoqui
- [dm-devel] multipath tools 0.4.5 bug?
Christophe Varoqui
- [dm-devel] [multipath-tools][PATCH] two small fixes
Christophe Varoqui
- [dm-devel] [multipath-tools][PATCH] two small fixes
Christophe Varoqui
- [dm-devel] [PATCH RFT/RFC 4/4] add dm-hp-sw hw handler
Christophe Varoqui
- [dm-devel] [PATCH RFT/RFC 4/4] add dm-hp-sw hw handler
Christophe Varoqui
- [dm-devel] [PATCH RFT/RFC 4/4] add dm-hp-sw hw handler
Ed Wilts
- [dm-devel] [PATCH RFT/RFC 4/4] add dm-hp-sw hw handler
Ed Wilts
- [dm-devel] multipath v0.4.5, nodes not appearing in /dev/
andysayshi
- [dm-devel] Re: multipath v0.4.5, nodes not appearing in /dev/
andysayshi
- [dm-devel] Problems with multipathd
gistolero at gmx.de
- [dm-devel] Problems with multipathd
gistolero at gmx.de
- [dm-devel] Re: EMC Cx300 multipath seems to work
gistolero at gmx.de
- [dm-devel] Re: EMC Cx300 multipath seems to work
gistolero at gmx.de
- [dm-devel] mpath_ctl observation + some novice questions
gistolero at gmx.de
- [dm-devel] FW: How to avoid lots of read ios to passive paths of active-pass ive storage devices?
goggin, edward
- [dm-devel] Proposed change to scsi_id parameter string in libmultipath/hwtab le.c for EMC Symmetrix
goggin, edward
- [dm-devel] Proposed change to scsi_id parameter string in libmultipath/hwtab le.c for EMC Symmetrix
goggin, edward
- [dm-devel] multipath conf file "device {}" support
goggin, edward
- [dm-devel] RE: [RFC PATCH 4/4] convert scsi to blkerr error values
goggin, edward
- [dm-devel] RE: [RFC PATCH 2/4] convert dm to blkerr error values
goggin, edward
- [dm-devel] RE: [RFC PATCH 4/4] convert scsi to blkerr error values
goggin, edward
- [dm-devel] RE: [RFC PATCH 4/4] convert scsi to blkerr error values
goggin, edward
- [dm-devel] Patch for setting pgfailback coded default for EMC CLARiiON and o thers
goggin, edward
- [dm-devel] RE: [RFC PATCH 4/4] convert scsi to blkerr error v alues
goggin, edward
- [dm-devel] RE: dm-devel Digest, Vol 19, Issue 1
shahid shaikh
- [dm-devel] [ANNOUNCE] multipath-tools-0.4.5
christophe varoqui
- [dm-devel] FW: How to avoid lots of read ios to passive paths of active-pass ive storage devices?
christophe varoqui
- [dm-devel] more multipath doc
christophe varoqui
- [dm-devel] new hardware handler
christophe varoqui
- [dm-devel] Problems with multipathd
christophe varoqui
- [dm-devel] multipath info: wwid
christophe varoqui
- [dm-devel] mpath_ctl observation + some novice questions
christophe varoqui
- [dm-devel] Re: [SUMMARY] My EMC CX300 and multipath-tools setup
christophe varoqui
- [dm-devel] Patch for setting pgfailback coded default for EMC CLARiiON and o thers
christophe varoqui
- [dm-devel] multipath conf file "device {}" support
christophe varoqui
- [dm-devel] How about shortening SCSI timeout value dynamically?
김재열
Last message date:
Fri Sep 30 23:07:04 UTC 2005
Archived on: Sat Mar 5 15:58:11 UTC 2022
This archive was generated by
Pipermail 0.09 (Mailman edition).