[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [dm-devel] multipath and StorageWorks HSG80



On Fri, Apr 21, 2006 at 10:09:42AM -0400, Philip R. Auld wrote:
> Rumor has it that on Fri, Apr 21, 2006 at 09:40:55AM -0400 Steve Feehan said:
> > 
> > I tracked this down and fixed the problem. But still, even with
> > dm-hp-sw loading before the SCSI devices are probed, I get a ton
> > of SCSI errors trying to access the "ghost" devices.
> 
> Those should be expected. The SCSI layers are trying to configure the
> devices (read capacity, partition tables etc). The dm-hp-sw module
> is not in that path so it can't do anything about that. They should be
> harmless. 
>  
> This is an architectural artifact of doing the multipathing above the
> SCSI layer.

OK. Then as Christophe Varoqui also suggested, I will just /try/
to not worry too much. ;)

Thanks.

-- 
Steve Feehan


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]