[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [dm-devel] DS4000 with multipath-tools 0.4.5




I compiled it, and it's working good. The only thing is, when I query the priority of a drive, I'm getting "Auto-volume Transfer not enabled":

---
# ./mpath_prio_tpc /dev/sdc
Auto-volume Transfer not enabled6

# ./mpath_prio_tpc /dev/sdd
Auto-volume Transfer not enabled1
---

I seem to be getting 6 for my preferred path and 1 for standby, which is good. Is AVT required, or can I still use mpath_prio_tcp?
I have multiple nodes of a Linux Cluster accessing the LUNs, so AVT has to be disabled.

Tenyo ************************************************************************************************** The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, or copy of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. **************************************************************************************************
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]