[dm-devel] [PATCH 04/13] scsi: exports busy status

[Kiyoshi Ueda]

This patch change scsi mid-layer to export its busy status.
Not set the busy flag, when scsi can't dispatch I/Os anymore and
needs to kill I/Os.  Otherwise, request stacking drivers may hold
requests forever.


Signed-off-by: Kiyoshi Ueda <k-ueda at ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura at ce.jp.nec.com>
Cc: James Bottomley <James.Bottomley at HansenPartnership.com>
---
 drivers/scsi/scsi.c     |    4 ++--
 drivers/scsi/scsi_lib.c |   23 ++++++++++++++++++++++-
 2 files changed, 24 insertions(+), 3 deletions(-)

Index: 2.6.27-rc6/drivers/scsi/scsi_lib.c
===================================================================
--- 2.6.27-rc6.orig/drivers/scsi/scsi_lib.c
+++ 2.6.27-rc6/drivers/scsi/scsi_lib.c
@@ -459,17 +459,30 @@ static void scsi_init_cmd_errh(struct sc
 
 void scsi_device_unbusy(struct scsi_device *sdev)
 {
+	int host_congested;
 	struct Scsi_Host *shost = sdev->host;
 	unsigned long flags;
 
 	spin_lock_irqsave(shost->host_lock, flags);
 	shost->host_busy--;
+	if ((shost->can_queue > 0 && shost->host_busy >= shost->can_queue) ||
+	    shost->host_blocked || shost->host_self_blocked ||
+	    scsi_host_in_recovery(shost))
+		host_congested = 1;
+	else
+		host_congested = 0;
+
 	if (unlikely(scsi_host_in_recovery(shost) &&
 		     (shost->host_failed || shost->host_eh_scheduled)))
 		scsi_eh_wakeup(shost);
 	spin_unlock(shost->host_lock);
+
 	spin_lock(sdev->request_queue->queue_lock);
 	sdev->device_busy--;
+	if (bdi_lld_congested(&sdev->request_queue->backing_dev_info) &&
+	    !host_congested && !(sdev->device_busy >= sdev->queue_depth) &&
+	    !sdev->device_blocked)
+		clear_bdi_lld_congested(&sdev->request_queue->backing_dev_info);
 	spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
 }
 
@@ -1495,9 +1508,14 @@ static void scsi_request_fn(struct reque
 		 * accept it.
 		 */
 		req = elv_next_request(q);
-		if (!req || !scsi_dev_queue_ready(q, sdev))
+		if (!req)
 			break;
 
+		if (!scsi_dev_queue_ready(q, sdev)) {
+			set_bdi_lld_congested(&q->backing_dev_info);
+			break;
+		}
+
 		if (unlikely(!scsi_device_online(sdev))) {
 			sdev_printk(KERN_ERR, sdev,
 				    "rejecting I/O to offline device\n");
@@ -1568,6 +1586,8 @@ static void scsi_request_fn(struct reque
 		rtn = scsi_dispatch_cmd(cmd);
 		spin_lock_irq(q->queue_lock);
 		if(rtn) {
+			set_bdi_lld_congested(&q->backing_dev_info);
+
 			/* we're refusing the command; because of
 			 * the way locks get dropped, we need to 
 			 * check here if plugging is required */
@@ -1592,6 +1612,7 @@ static void scsi_request_fn(struct reque
 	 * later time.
 	 */
 	spin_lock_irq(q->queue_lock);
+	set_bdi_lld_congested(&q->backing_dev_info);
 	blk_requeue_request(q, req);
 	sdev->device_busy--;
 	if(sdev->device_busy == 0)
Index: 2.6.27-rc6/drivers/scsi/scsi.c
===================================================================
--- 2.6.27-rc6.orig/drivers/scsi/scsi.c
+++ 2.6.27-rc6/drivers/scsi/scsi.c
@@ -861,8 +861,6 @@ void scsi_finish_command(struct scsi_cmn
 	struct scsi_driver *drv;
 	unsigned int good_bytes;
 
-	scsi_device_unbusy(sdev);
-
         /*
          * Clear the flags which say that the device/host is no longer
          * capable of accepting new commands.  These are set in scsi_queue.c
@@ -874,6 +872,8 @@ void scsi_finish_command(struct scsi_cmn
         shost->host_blocked = 0;
         sdev->device_blocked = 0;
 
+	scsi_device_unbusy(sdev);
+
 	/*
 	 * If we have valid sense information, then some kind of recovery
 	 * must have taken place.  Make a note of this.