[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [dm-devel] Multipath setup and rdac questions



Christian Røsnes wrote:
# multipath -ll
mpathe (36002219000918b4c00005b6c497e6632) dm-4 DELL,MD Virtual Disk
[size=5.5T][features=1 queue_if_no_path][hwhandler=1 rdac]
\_ round-robin 0 [prio=6][active]
 \_ 9:0:0:1  sdi 8:128 [active][ready]

That looks better! Seems like device-mapper multipath is configuring these OK now. You might want to just check that mpp is fully disabled if you're going with device-mapper (and also test some cable-pulls to make sure the RDAC failover happens properly) but this is certainly picking up your hw handler configuration now.

Regards,
Bryn.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]