FW: [dm-devel] Multipath setup and rdac questions

[Moger, Babu]

This is looks good to me.  Now your are ready to run your tests..

Thanks
Babu Moger
________________________________
From: Christian Røsnes [mailto:christian.rosnes at gmail.com]
Sent: Thursday, February 05, 2009 2:45 PM
To: Moger, Babu
Cc: dm-devel at redhat.com
Subject: Re: FW: [dm-devel] Multipath setup and rdac questions


On Thu, Feb 5, 2009 at 9:32 PM, Moger, Babu <Babu.Moger at lsi.com<mailto:Babu.Moger at lsi.com>> wrote:

Your Vendor id is DELL   and Product id is MD3000i



Now update the multipath.conf with the above information and reboot the system.



vendor                  "DELL"

      product                 "MD3000i"



You should see the devices.  Let me know if you need more information..
Ok. Changed multipath.conf and now multipath -ll shows:

# multipath -ll
mpathe (36002219000918b4c00005b6c497e6632) dm-4 DELL,MD3000i
[size=5.5T][features=1 queue_if_no_path][hwhandler=1 rdac]
\_ round-robin 0 [prio=12][active]
 \_ 4:0:0:1  sdm  8:192  [active][ready]
 \_ 3:0:0:1  sdl  8:176  [active][ready]
\_ round-robin 0 [prio=2][enabled]
 \_ 2:0:0:1  sds  65:32  [active][ghost]
 \_ 1:0:0:1  sdr  65:16  [active][ghost]
mpathd (36002219000918b3300002e6e497e6315) dm-6 DELL,MD3000i
[size=5.5T][features=1 queue_if_no_path][hwhandler=1 rdac]
\_ round-robin 0 [prio=6][active]
 \_ 4:0:0:2  sdo  8:224  [active][ready]
 \_ 3:0:0:2  sdn  8:208  [active][ready]
mpathc (36002219000918b4c00005b6f497e6695) dm-1 DELL,MD3000i
[size=5.5T][features=1 queue_if_no_path][hwhandler=1 rdac]
\_ round-robin 0 [prio=6][active]
 \_ 3:0:0:3  sdz  65:144 [active][ready]
mpatha (36002219000918b4c00005b72497e66f3) dm-0 DELL,MD3000i
[size=5.5T][features=1 queue_if_no_path][hwhandler=1 rdac]
\_ round-robin 0 [prio=3][active]
 \_ 2:0:0:5  sdba 67:64  [active][ready]
mpathl (36002219000918b3300002e6b497e62a6) dm-8 DELL,MD3000i
[size=5.5T][features=1 queue_if_no_path][hwhandler=1 rdac]
\_ round-robin 0 [prio=12][active]
 \_ 4:0:0:0  sde  8:64   [active][ready]
 \_ 3:0:0:0  sdd  8:48   [active][ready]
\_ round-robin 0 [prio=2][enabled]
 \_ 2:0:0:0  sdc  8:32   [active][ghost]
 \_ 1:0:0:0  sdb  8:16   [active][ghost]
mpathk (36002219000922cdf000004a4497e53f5) dm-7 DELL,MD3000i
[size=5.5T][features=1 queue_if_no_path][hwhandler=1 rdac]
\_ round-robin 0 [prio=12][active]
 \_ 6:0:0:10 sdi  8:128  [active][ready]
 \_ 5:0:0:10 sdh  8:112  [active][ready]
\_ round-robin 0 [prio=2][enabled]
 \_ 8:0:0:10 sdg  8:96   [active][ghost]
 \_ 7:0:0:10 sdf  8:80   [active][ghost]
mpathj (36002219000918b2e000004b2497e581c) dm-5 DELL,MD3000i
[size=5.5T][features=1 queue_if_no_path][hwhandler=1 rdac]
\_ round-robin 0 [prio=12][active]
 \_ 8:0:0:11 sdq  65:0   [active][ready]
 \_ 7:0:0:11 sdp  8:240  [active][ready]
\_ round-robin 0 [prio=2][enabled]
 \_ 6:0:0:11 sdk  8:160  [active][ghost]
 \_ 5:0:0:11 sdj  8:144  [active][ghost]
mpathi (36002219000922cdf000004a7497e54dd) dm-3 DELL,MD3000i
[size=5.5T][features=1 queue_if_no_path][hwhandler=1 rdac]
\_ round-robin 0 [prio=12][active]
 \_ 6:0:0:12 sdw  65:96  [active][ready]
 \_ 5:0:0:12 sdv  65:80  [active][ready]
\_ round-robin 0 [prio=2][enabled]
 \_ 8:0:0:12 sdu  65:64  [active][ghost]
 \_ 7:0:0:12 sdt  65:48  [active][ghost]
mpathh (36002219000918b2e000004b5497e587e) dm-2 DELL,MD3000i
[size=5.5T][features=1 queue_if_no_path][hwhandler=1 rdac]
\_ round-robin 0 [prio=6][active]
 \_ 6:0:0:13 sdy  65:128 [active][ready]
 \_ 5:0:0:13 sdx  65:112 [active][ready]

Thank you
Christian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/dm-devel/attachments/20090205/bee4e8e6/attachment.htm>