Re: [dm-devel] /dev/sdaa /dev/sdab ... not recognized as valid paths?

[Hannes Reinecke <hare suse de>]

Hi Sebastian,

Sebastian Reitenbach wrote:
> Hi,
>
> I do present 8 luns to the cluster. For each lun there are 4 ways through the  
> SAN that can be used. Therefore I have devices like /dev/sdaa /dev/sdab and 
> so on. The output of multipath -ll shows some disks with 4 paths, some with 
> three, some only with two. In the output of multipath -ll only disks with 
> three letters are shown e.g. /dev/sda. 
> when I run e.g. /sbin/scsi_id -g -u -s /block/sdaa, then it outputs one of the 
> configured ID's that I already have in /etc/multipath.conf.
>
> How can I add these disks to the multipath failover?
>
> I'm on SLES10 sp2.
Have you enabled udev?
No, it's not on by default. Don't ask.

Cheers,

Hannes
--
Dr. Hannes Reinecke		      zSeries & Storage
hare suse de			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Markus Rex, HRB 16746 (AG Nürnberg)