[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[dm-devel] Re: Clariion EMC CX300 and "long trespass command will be send" message



On Tue, Mar 10, 2009 at 11:41 AM, Javier Barroso <javibarroso gmail com> wrote:
Hi list,

We have debian lenny a iscsi + multipath system with a Clariion EMC RX300 as iscsi server. It is working fine, but from some days ago, it is writting (continously) on syslog:
Sorry, I wanted to say EMC Clariion CX300


[5078349.903410] scsi 6:0:0:0: rejecting I/O to dead device
[5078349.903410] scsi 7:0:0:0: rejecting I/O to dead device
[5078349.903410] device-mapper: multipath emc: long trespass command will be send
[5078349.903410] device-mapper: multipath emc: honor reservation bit will not be set (default)
[5078349.947653] device-mapper: table: 254:6: multipath: unknown path selector type
[5078349.947708] device-mapper: ioctl: error adding target to table

scsi 6:0:0:0 not exist at lsscsi:

# lscsi
[8:0:0:0]    disk    DGC      RAID 5           0324  /dev/sdc
[9:0:0:0]    disk    DGC      RAID 5           0324  /dev/sdd
[10:0:0:0]   disk    DGC      RAID 5           0324  /dev/sda
[11:0:0:0]   disk    DGC      RAID 5           0324  /dev/sdb

multipath is working fine:
# multipath -ll
mpath0 (360060160e5101f0020efc45a01cddd11) dm-6 DGC     ,RAID 5
[size=512G][features=1 queue_if_no_path][hwhandler=1 emc]
\_ round-robin 0 [prio=2][active]
 \_ 8:0:0:0  sdc 8:32  [active][ready]
 \_ 9:0:0:0  sdd 8:48  [active][ready]
\_ round-robin 0 [prio=0][enabled]
 \_ 10:0:0:0 sda 8:0   [active][ready]
 \_ 11:0:0:0 sdb 8:16  [active][ready]

Dispositve 254:6 is mpath0:
# devmap_name 254 6
mpath0

How could can I stop scsi system / multipath from this messages ?

Is there any command who could help us ?

Thank you for any advice
PD: Sorry for my english


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]