[dm-devel] max number of paths
Charlie Sharkey
charlie.sharkey at bustech.com
Mon Mar 15 20:26:07 UTC 2010
I'm seeing this on a Suse Sles10 x86_64 system, 2.6.16.60-0.34-smp.
I have a qlogic qle2462 connected to a hp eva back end.
-----Original Message-----
From: dm-devel-bounces at redhat.com [mailto:dm-devel-bounces at redhat.com]
On Behalf Of guy keren
Sent: Monday, March 15, 2010 4:15 PM
To: device-mapper development
Subject: Re: [dm-devel] max number of paths
Charlie Sharkey wrote:
>
>
> Is there a maximum number of paths supported by the device mapper ?
>
> I have a setup with 12 paths to 14 luns. I had to reduce the number of
paths
>
> to 10 for the device mapper to startup correctly.
i have seen such problems with linux kernel 2.4, long ago, when max SCSI
disk devices was 256 (and hence - also max paths for such devices).
if you're not using SCSI, but rather some other type of device - it
could be a limitation of the specific low level driver.
which kernel are you using? and which linux distribution? and what kind
of block devices do your disks reside on?
--guy
--
dm-devel mailing list
dm-devel at redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel
More information about the dm-devel
mailing list