2011-February Archive by Thread
Messages are ordered newest-to-oldest in this index. The newest
threads will be at the top of this page, the oldest will be at the bottom.
Within a single thread, the first mail note is the START of the
thread; the notes following that are in the chronological order of
when they were received. So globally, newest messages are at the top,
but within a thread, the oldest (the start of the thread) is at the
top.
If you think about it, it is confusing. Just go with the flow and everything will be all right.
- [dm-devel] clustered snapshots status, LVM on shared storage without CLVM?,
Nikola Ciprich
- [dm-devel] Dell MD3200 - sd: Current: sense key: Illegal Request ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1,
Charles Slivkoff
- [dm-devel] mirrored device with thousand of mapping table entries,
Eli Malul
- Re: [dm-devel] [PATCH 1/1] RFC: scsi/dm-mpath: return -EACCES on reservation conflict,
Eddie Williams
- Re: [dm-devel] call for slideware ;),
Joe Thornber
- [dm-devel] Where can I get thin provisioning target sources?,
xiaoli zhu
- [dm-devel] dm_mod crashed while adding new luns into multipath,
Janec, Jozef
- [dm-devel] multipath-tools ./multipath.conf.annotated lib ...,
bmarzins
- [dm-devel] Linux DMM Questions,
CHANDRASEKARAN, GIRIDHAR (GIRI) (ATTSI)
- [dm-devel] [PATCH] Fix over-zealous flush_disk when changing device size.,
NeilBrown
- [dm-devel] multipath-tools/libmultipath configure.c struc ...,
bmarzins
- [dm-devel] timestamp for shared snapshot,
devicemapper niko
- [dm-devel] What is the deal with the partition separator?,
Phillip Susi
- [dm-devel] [PATCH] Do not open log and cow device read-write for read-only mappings,
Milan Broz
- Re: [dm-devel] [PATCH] loop: clear read-only flag in loop_clr_fd.,
Milan Broz
- [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Milan Broz
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Tejun Heo
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Milan Broz
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Tejun Heo
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
NeilBrown
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Alasdair G Kergon
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Milan Broz
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Alasdair G Kergon
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Tejun Heo
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Alasdair G Kergon
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Tejun Heo
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Milan Broz
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Tejun Heo
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Milan Broz
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Tejun Heo
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Alasdair G Kergon
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Tejun Heo
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Milan Broz
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Tejun Heo
- [dm-devel] [PATCH] Return EROFS if read-only detected on block device,
Milan Broz
- Re: [dm-devel] [PATCH][RFC] dm: Do not open log and cow device read-write for read-only mappings,
Alasdair G Kergon
- Re: [dm-devel] [PATCH] loop: clear read-only flag in loop_clr_fd.,
Tejun Heo
- [dm-devel] What is the status of RAID5 support with pdc (AMD SB850 Southbridge) hardware? dmraid -rD output,
rkliese gmx de
- [dm-devel] [PATCH v2] scsi_dh_rdac : Adding MODULE VERSION for rdac device handler,
Moger, Babu
- [dm-devel] [PATCH v2] [SCSI] fix kzalloc in scsi device handler,
Moger, Babu
- [dm-devel] [PATCH} scsi_dh_rdac: fix for lun_table update for rdac device handler,
Moger, Babu
- [dm-devel] [PATCH 2/2 v2] dm mpath: allow table load with 0 priority groups,
Mike Snitzer
- [dm-devel] [PATCH]: multipath: fail path on zero size devices,
Menny_Hamburger
- [dm-devel] multipath: rdac on IBM 1746 (SAS connection to DS3512),
Peter Volkov
[dm-devel] dd slow while reading on multipathing, writing is fast,
bart . coninckx
[dm-devel] [PATCH 1/3] dm crypt: wipe keys string immediately after key is set,
Milan Broz
[dm-devel] Using the dm tools to create a writable "mirror" of a physical disk,
Anders Andersson
[dm-devel] [PATCH] add -r to make resulting device read-only,
Ritesh Raj Sarraf
Re: [dm-devel] Improving dm-mirror as a final year project,
Jonathan Brassow
Re: [dm-devel] [PATCH 2/2] dm mpath: allow table load with 0 priority groups,
Hannes Reinecke
Re: [dm-devel] [RFC PATCH] multipathd: use 0 for initial pg if nr_priority_groups=0,
Hannes Reinecke
Re: [dm-devel] Possible severe bug in the device mapper?,
Andreas Heinlein
Re: [dm-devel] [PATCH]: scsi_dh_rdac: fix BUG_ON in get_rdac_data from within send_mode_select,
Menny_Hamburger
Re: [dm-devel] multipath: change the DEFAULT_MINIO for the request based multipath,
Malahal Naineni