[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [dm-devel] dm-ioband max-bw and min-bw



May be my previous message was not delivered, so i repeat it now:

2011/3/23 Степан Фёдоров <stepan fedorov clodo ru>:
> Hello!
> I have some questions about dm-ioband module.
> My m-ioband patch version is 1.14.0 on SLES11SP1 2.6.32.29-0.3-xen kernel.
> /dev/mapper/1id-22-109 is a multipath device. In normal case, block device
> performance test shows 500-600Mb/sec on this device.
> Next i do next commands:
> echo "0 $(blockdev --getsize /dev/mapper/1id-22-109) ioband
> /dev/mapper/1id-22-109 0 0 0 none range-bw 0 :10000:50000" |dmsetup create
> iob-22-109
> in /dev/mapper i see iob-22-109 device. OK.
> My block device performance test shows on this device about 50Mb/sec.
> dmsetup table shows me:
> iob-22-109: 0 10485760 ioband 253:5 0 4 192 none range-bw 12288 :10000:50000
> for this device.
> All this is OK, and next i want to change somthing. I do:
> dmsetup message iob-22-109 0 max-bw 70000
> My block device performance test shows now on this device about
> 500-600Mb/sec, and dmsetup table shows:
> iob-22-109: 0 10485760 ioband 253:5 0 4 192 none range-bw 12288 :10000:0
> As you can see - maximum bandwidth value, resets to zero after setting it to
> 70Mb by "dmsetup message ..." command.
> If next i change min-bw by same way - it also rests to zero instead right
> value.
> My question: is this a bug in some software, or just a result of something
> wrong in my actions?
> Thank you!
>


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]