[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: system crash with 2.4.18-17.7 kernel rpm



Brian,

I have the same problem.  I have tried some of the other solutions with
no luck.  Here is what happens:

I have 2 basically identical systems.  One of the systems loads the net
...7smpx kernel just fine.  The other stops loading at the following:

...
Starting kswapd
VFS: Diskqiotas version dquot-6.5.0 initialized
pty: 2048 Unix98 ptys configured
  and thats it.  It just hangs here.

As I said, hardware configuration is basically the same:

RH 7.2
Intel L440GX+ motherboard
2ea SCSI HD's

Differences are:
System that hangs:
   1 processor
   Has an IDE drive in addition to SCSI drives

System that boots A-OK:
   2 processors
   No IDE drive

On both of these systems I have to boot the smp kernel because of a
problem with the L440GX+ motherboard and it's onboad Adaptec controller.

I boot off of the previous kernel.  In the past for kernel updates all I
have had to do is download the kernel via up2date and reboot.  No other
special stuff.

I'm at a loss.

stew
 


-----Original Message-----
From: enigma-list-admin redhat com
[mailto:enigma-list-admin redhat com]On Behalf Of Brian Ugie
Sent: Tuesday, November 05, 2002 7:56 PM
To: enigma-list redhat com
Subject: system crash with 2.4.18-17.7 kernel rpm


Hi all,

 

    I have just updated my system via the RHND and as part of the update
the kernel was taken from 2.4.9-34smp to 2.4.18-17.7smpx. When the
system boots up it crashes after these few lines.

 


_______________________________________________
enigma-list mailing list
enigma-list redhat com
https://listman.redhat.com/mailman/listinfo/enigma-li

<<attachment: winmail.dat>>


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]