RE: New member and a Controller-card question

["Wayne Seth" <wseth c2i2 com>]

Have you tried installing a fresh copy of RH with the new card
installed.  If your system "saw" the controller card then, you
have the drivers for it.

Sincerely,

Wayne Seth
Project Manager
(office)  520-538-0110
(home) 520-459-8069

-----Original Message-----
From: enigma-list-admin redhat com
[mailto:enigma-list-admin redhat com]On Behalf Of Trond Husø
Sent: Tuesday, October 01, 2002 2:21 AM
To: enigma-list redhat com
Subject: Re: New member and a Controller-card question

That's wouldn't do any good, since the drivers for this card are
not in the
rh7.2 distro...

-t-

----- Original Message -----
From: "Wayne Seth" <wseth c2i2 com>
To: <enigma-list redhat com>
Sent: Tuesday, October 01, 2002 1:39 AM
Subject: RE: New member and a Controller-card question


> Why don't you plug all your hard drives into the new controller
> card?
>
> Sincerely,
>
> Wayne Seth
> Project Manager
> (office)  520-538-0110
> (home) 520-459-8069
>
> -----Original Message-----
> From: enigma-list-admin redhat com
> [mailto:enigma-list-admin redhat com]On Behalf Of Trond Husø
> Sent: Monday, September 30, 2002 12:56 AM
> To: enigma-list redhat com
> Subject: New member and a Controller-card question
>
> Hi All,
>
> I'm a new member of this list from Norway - and has been using
> the RH7.2 for
> quite a while now. Most of the problems that I've stumbled
> accross - or made
> up myself - has been fixed, but the one I got now is a bit
> tricky.
>
> I recently bought a 80gb Western Digital HD and since my old
card
> (with amd
> k6-300) doesn't support such big discs, and since I didn't want
> to upgrade
> the bios, I bought a Silicon Image Sil680 ATA/133
> controller-card.
> It's found in bootup, but not when LILO-starts. I guess it has
> something to
> do with me not having the Linux-drivers for this card.
> Anyway. The box is now having two controllers (the Sil and the
> one on the
> motherboard), and I like it to be that way. Are anyone else
> running a
> Linux-box with two controller-cards? If so, how did you got it
up
> and
> running?
> I downloaded the 2.4.19-kernel, and this one finds the card....
I
> read
> somewhere that I should do a cat /proc/pci | more
>
> This gives the following result:
> PCI devices found:
> Bus 0, device 0, function 0:
> Host bridge: VIA Technologies, Inc. VT82C597 [Apollo VP3] (rev
> 4).
> Master Capable. Latency=16.
> Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff].
> Bus 0, device 1, function 0:
> PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
> MVP3/Pro133x AGP]
> (rev 0).
> Master Capable. No bursts. Min Gnt=12.
> Bus 0, device 7, function 0:
> ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA
> [Apollo VP] (rev
> 65).
> Bus 0, device 7, function 1:
> IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
> Master Capable. Latency=64.
> I/O at 0xc000 [0xc00f].
> Bus 0, device 7, function 3:
> Bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 16).
> Bus 0, device 8, function 0:
> RAID bus controller: PCI device 1095:0680 (CMD Technology Inc)
> (rev 1).
> IRQ 11.
> Master Capable. Latency=64.
> I/O at 0xc800 [0xc807].
> I/O at 0xcc00 [0xcc03].
> I/O at 0xd000 [0xd007].
> I/O at 0xd400 [0xd403].
> I/O at 0xd800 [0xd80f].
> Non-prefetchable 32 bit memory at 0xed001000 [0xed0010ff].
> Bus 0, device 9, function 0:
> Ethernet controller: Davicom Semiconductor, Inc. Ethernet
100/10
> MBit (rev
> 49).
> IRQ 10.
> Master Capable. Latency=64. Min Gnt=20.Max Lat=40.
> I/O at 0xdc00 [0xdcff].
> Non-prefetchable 32 bit memory at 0xed000000 [0xed0000ff].
> Bus 0, device 10, function 0:
> Non-VGA unclassified device: Symbios Logic Inc. (formerly NCR)
> 53c810 (rev
> 1).
> IRQ 9.
> Master Capable. Latency=64.
> I/O at 0xe000 [0xe0ff].
> Non-prefetchable 32 bit memory at 0xed002000 [0xed0020ff].
> Bus 0, device 11, function 0:
> Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
> (rev 16).
> IRQ 5.
> Master Capable. Latency=64. Min Gnt=32.Max Lat=64.
> I/O at 0xe400 [0xe4ff].
> Non-prefetchable 32 bit memory at 0xed003000 [0xed0030ff].
> Bus 1, device 0, function 0:
> VGA compatible controller: nVidia Corporation Riva TnT 128
[NV04]
> (rev 4).
> IRQ 11.
> Master Capable. Latency=64. Min Gnt=5.Max Lat=1.
> Non-prefetchable 32 bit memory at 0xe8000000 [0xe8ffffff].
> Prefetchable 32 bit memory at 0xea000000 [0xeaffffff].
>
> cat /proc/ioports
> Came up with the following list:
>
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-007f : rtc
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 02f8-02ff : serial(auto)
> 0376-0376 : ide1
> 0378-037a : parport0
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 03f8-03ff : serial(auto)
> 0778-077a : parport0
> 0cf8-0cff : PCI conf1
> 5000-50ff : VIA Technologies, Inc. VT82C586B ACPI
> b000-bfff : PCI Bus #01
> c000-c00f : VIA Technologies, Inc. Bus Master IDE
> c000-c007 : ide0
> c008-c00f : ide1
> c800-c807 : PCI device 1095:0680 (CMD Technology Inc)
> cc00-cc03 : PCI device 1095:0680 (CMD Technology Inc)
> d000-d007 : PCI device 1095:0680 (CMD Technology Inc)
> d400-d403 : PCI device 1095:0680 (CMD Technology Inc)
> d800-d80f : PCI device 1095:0680 (CMD Technology Inc)
> dc00-dcff : Davicom Semiconductor, Inc. Ethernet 100/10 MBit
> dc00-dcff : tulip
> e000-e0ff : Symbios Logic Inc. (formerly NCR) 53c810
> e000-e07f : ncr53c8xx
> e400-e4ff : Realtek Semiconductor Co., Ltd. RTL-8139
> e400-e4ff : 8139too
>
> The website said also something about adding a ide2=c800,cc00
and
> so on...
> to the lilo... Not sure if it will work...
> Any help is appreciated.
>
> Yours,
> Trond
>
>
>
> _______________________________________________
> enigma-list mailing list
> enigma-list redhat com
> https://listman.redhat.com/mailman/listinfo/enigma-list
>
>
>
> _______________________________________________
> enigma-list mailing list
> enigma-list redhat com
> https://listman.redhat.com/mailman/listinfo/enigma-list



_______________________________________________
enigma-list mailing list
enigma-list redhat com
https://listman.redhat.com/mailman/listinfo/enigma-list