Re: New member and a Controller-card question

[Trond Husø <trondhu eunet no>]

Okay.. I shall try and do that.

I also learned today that RH7.3 does support CMD680, but then I have to
upgrade to 7.3. Is that possible?
(I got 7.2)

-t-

----- Original Message -----
From: "Wayne Seth" <wseth c2i2 com>
To: <enigma-list redhat com>
Sent: Thursday, October 03, 2002 12:07 AM
Subject: RE: New member and a Controller-card question


> You don't have to delete anything.  Just do a re-install from the
> floppy or disk one.  Of course you will need to adjust your BIOS
> to boot to whatever media you want to install from.
>
> Sincerely,
>
> Wayne Seth
> Project Manager
> (office)  520-538-0110
> (home) 520-459-8069
>
> -----Original Message-----
> From: enigma-list-admin redhat com
> [mailto:enigma-list-admin redhat com]On Behalf Of Trond Husø
> Sent: Wednesday, October 02, 2002 2:40 AM
> To: enigma-list redhat com
> Subject: Re: New member and a Controller-card question
>
> Hi Wayne,
>
> thanks for the tip. Just a q: How do I install a fresh copy of
> it? Do I
> delete everything?
>
> -t-
>
> ----- Original Message -----
> From: "Wayne Seth" <wseth c2i2 com>
> To: <enigma-list redhat com>
> Sent: Wednesday, October 02, 2002 2:04 AM
> Subject: RE: New member and a Controller-card question
>
>
> > Have you tried installing a fresh copy of RH with the new card
> > installed.  If your system "saw" the controller card then, you
> > have the drivers for it.
> >
> > Sincerely,
> >
> > Wayne Seth
> > Project Manager
> > (office)  520-538-0110
> > (home) 520-459-8069
> >
> > -----Original Message-----
> > From: enigma-list-admin redhat com
> > [mailto:enigma-list-admin redhat com]On Behalf Of Trond Husø
> > Sent: Tuesday, October 01, 2002 2:21 AM
> > To: enigma-list redhat com
> > Subject: Re: New member and a Controller-card question
> >
> > That's wouldn't do any good, since the drivers for this card
> are
> > not in the
> > rh7.2 distro...
> >
> > -t-
> >
> > ----- Original Message -----
> > From: "Wayne Seth" <wseth c2i2 com>
> > To: <enigma-list redhat com>
> > Sent: Tuesday, October 01, 2002 1:39 AM
> > Subject: RE: New member and a Controller-card question
> >
> >
> > > Why don't you plug all your hard drives into the new
> controller
> > > card?
> > >
> > > Sincerely,
> > >
> > > Wayne Seth
> > > Project Manager
> > > (office)  520-538-0110
> > > (home) 520-459-8069
> > >
> > > -----Original Message-----
> > > From: enigma-list-admin redhat com
> > > [mailto:enigma-list-admin redhat com]On Behalf Of Trond Husø
> > > Sent: Monday, September 30, 2002 12:56 AM
> > > To: enigma-list redhat com
> > > Subject: New member and a Controller-card question
> > >
> > > Hi All,
> > >
> > > I'm a new member of this list from Norway - and has been
> using
> > > the RH7.2 for
> > > quite a while now. Most of the problems that I've stumbled
> > > accross - or made
> > > up myself - has been fixed, but the one I got now is a bit
> > > tricky.
> > >
> > > I recently bought a 80gb Western Digital HD and since my old
> > card
> > > (with amd
> > > k6-300) doesn't support such big discs, and since I didn't
> want
> > > to upgrade
> > > the bios, I bought a Silicon Image Sil680 ATA/133
> > > controller-card.
> > > It's found in bootup, but not when LILO-starts. I guess it
> has
> > > something to
> > > do with me not having the Linux-drivers for this card.
> > > Anyway. The box is now having two controllers (the Sil and
> the
> > > one on the
> > > motherboard), and I like it to be that way. Are anyone else
> > > running a
> > > Linux-box with two controller-cards? If so, how did you got
> it
> > up
> > > and
> > > running?
> > > I downloaded the 2.4.19-kernel, and this one finds the
> card....
> > I
> > > read
> > > somewhere that I should do a cat /proc/pci | more
> > >
> > > This gives the following result:
> > > PCI devices found:
> > > Bus 0, device 0, function 0:
> > > Host bridge: VIA Technologies, Inc. VT82C597 [Apollo VP3]
> (rev
> > > 4).
> > > Master Capable. Latency=16.
> > > Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff].
> > > Bus 0, device 1, function 0:
> > > PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
> > > MVP3/Pro133x AGP]
> > > (rev 0).
> > > Master Capable. No bursts. Min Gnt=12.
> > > Bus 0, device 7, function 0:
> > > ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA
> > > [Apollo VP] (rev
> > > 65).
> > > Bus 0, device 7, function 1:
> > > IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
> > > Master Capable. Latency=64.
> > > I/O at 0xc000 [0xc00f].
> > > Bus 0, device 7, function 3:
> > > Bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 16).
> > > Bus 0, device 8, function 0:
> > > RAID bus controller: PCI device 1095:0680 (CMD Technology
> Inc)
> > > (rev 1).
> > > IRQ 11.
> > > Master Capable. Latency=64.
> > > I/O at 0xc800 [0xc807].
> > > I/O at 0xcc00 [0xcc03].
> > > I/O at 0xd000 [0xd007].
> > > I/O at 0xd400 [0xd403].
> > > I/O at 0xd800 [0xd80f].
> > > Non-prefetchable 32 bit memory at 0xed001000 [0xed0010ff].
> > > Bus 0, device 9, function 0:
> > > Ethernet controller: Davicom Semiconductor, Inc. Ethernet
> > 100/10
> > > MBit (rev
> > > 49).
> > > IRQ 10.
> > > Master Capable. Latency=64. Min Gnt=20.Max Lat=40.
> > > I/O at 0xdc00 [0xdcff].
> > > Non-prefetchable 32 bit memory at 0xed000000 [0xed0000ff].
> > > Bus 0, device 10, function 0:
> > > Non-VGA unclassified device: Symbios Logic Inc. (formerly
> NCR)
> > > 53c810 (rev
> > > 1).
> > > IRQ 9.
> > > Master Capable. Latency=64.
> > > I/O at 0xe000 [0xe0ff].
> > > Non-prefetchable 32 bit memory at 0xed002000 [0xed0020ff].
> > > Bus 0, device 11, function 0:
> > > Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
> > > (rev 16).
> > > IRQ 5.
> > > Master Capable. Latency=64. Min Gnt=32.Max Lat=64.
> > > I/O at 0xe400 [0xe4ff].
> > > Non-prefetchable 32 bit memory at 0xed003000 [0xed0030ff].
> > > Bus 1, device 0, function 0:
> > > VGA compatible controller: nVidia Corporation Riva TnT 128
> > [NV04]
> > > (rev 4).
> > > IRQ 11.
> > > Master Capable. Latency=64. Min Gnt=5.Max Lat=1.
> > > Non-prefetchable 32 bit memory at 0xe8000000 [0xe8ffffff].
> > > Prefetchable 32 bit memory at 0xea000000 [0xeaffffff].
> > >
> > > cat /proc/ioports
> > > Came up with the following list:
> > >
> > > 0000-001f : dma1
> > > 0020-003f : pic1
> > > 0040-005f : timer
> > > 0060-006f : keyboard
> > > 0070-007f : rtc
> > > 0080-008f : dma page reg
> > > 00a0-00bf : pic2
> > > 00c0-00df : dma2
> > > 00f0-00ff : fpu
> > > 0170-0177 : ide1
> > > 01f0-01f7 : ide0
> > > 02f8-02ff : serial(auto)
> > > 0376-0376 : ide1
> > > 0378-037a : parport0
> > > 03c0-03df : vga+
> > > 03f6-03f6 : ide0
> > > 03f8-03ff : serial(auto)
> > > 0778-077a : parport0
> > > 0cf8-0cff : PCI conf1
> > > 5000-50ff : VIA Technologies, Inc. VT82C586B ACPI
> > > b000-bfff : PCI Bus #01
> > > c000-c00f : VIA Technologies, Inc. Bus Master IDE
> > > c000-c007 : ide0
> > > c008-c00f : ide1
> > > c800-c807 : PCI device 1095:0680 (CMD Technology Inc)
> > > cc00-cc03 : PCI device 1095:0680 (CMD Technology Inc)
> > > d000-d007 : PCI device 1095:0680 (CMD Technology Inc)
> > > d400-d403 : PCI device 1095:0680 (CMD Technology Inc)
> > > d800-d80f : PCI device 1095:0680 (CMD Technology Inc)
> > > dc00-dcff : Davicom Semiconductor, Inc. Ethernet 100/10 MBit
> > > dc00-dcff : tulip
> > > e000-e0ff : Symbios Logic Inc. (formerly NCR) 53c810
> > > e000-e07f : ncr53c8xx
> > > e400-e4ff : Realtek Semiconductor Co., Ltd. RTL-8139
> > > e400-e4ff : 8139too
> > >
> > > The website said also something about adding a ide2=c800,cc00
> > and
> > > so on...
> > > to the lilo... Not sure if it will work...
> > > Any help is appreciated.
> > >
> > > Yours,
> > > Trond
> > >
> > >
> > >
> > > _______________________________________________
> > > enigma-list mailing list
> > > enigma-list redhat com
> > > https://listman.redhat.com/mailman/listinfo/enigma-list
> > >
> > >
> > >
> > > _______________________________________________
> > > enigma-list mailing list
> > > enigma-list redhat com
> > > https://listman.redhat.com/mailman/listinfo/enigma-list
> >
> >
> >
> > _______________________________________________
> > enigma-list mailing list
> > enigma-list redhat com
> > https://listman.redhat.com/mailman/listinfo/enigma-list
> >
> >
> >
> > _______________________________________________
> > enigma-list mailing list
> > enigma-list redhat com
> > https://listman.redhat.com/mailman/listinfo/enigma-list
>
>
>
> _______________________________________________
> enigma-list mailing list
> enigma-list redhat com
> https://listman.redhat.com/mailman/listinfo/enigma-list
>
>
>
> _______________________________________________
> enigma-list mailing list
> enigma-list redhat com
> https://listman.redhat.com/mailman/listinfo/enigma-list