[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: rawhide report: 20050912 changes



On Mon, 2005-09-12 at 21:16 +0200, Dennis Jacobfeuerborn wrote:

> When I boot with the kernels 1547 or 1549 and I get to the "Initializing 
> Hardware" bit the display vanishes after "audio" gets printed and my 
> monitor tells me that the frequency is out of range. The machine then 
> continues to boot normaly an as soon as XOrg comes up everything works 
> fine. When I shut down the machine again and it goes back to text mode I 
> get the signal frequency out of range error by my monitor again.
> Kernel 1530 did not show this behaviour (but does no longer work for me 
> since USB and network devices no longer work after the latest rawhide updates).

Yep, same thing seen here.  I believe it has been mentioned on the
beta-list (I brought this up, although not the out of frequency part but
could be related), and might be due to kernel fb modules being
loaded/unloaded, which Bill Nottingham says due to initscripts/whatever
loading them and shouldn't.

Maybe Bill or DaveJ will chime in about it.

BTW, this is on a fairly less than year old machine, running PIV 2.8Ghz
with ATI Radeon 9200 along with KDS 9 series monitor.

-- 
Mike Chambers
Madisonville, KY

"Everything is always harder, before it's easier!


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]