rpms/kernel/F-8 linux-2.6-stable-queue.patch, NONE, 1.1 kernel.spec, 1.507, 1.508
Chuck Ebbert (cebbert)
fedora-extras-commits at redhat.com
Mon Aug 4 05:19:31 UTC 2008
Author: cebbert
Update of /cvs/pkgs/rpms/kernel/F-8
In directory cvs-int.fedora.redhat.com:/tmp/cvs-serv27042
Modified Files:
kernel.spec
Added Files:
linux-2.6-stable-queue.patch
Log Message:
Add patches queued for 2.6.25.15.
Add conflict against older iwl4965 firmware.
linux-2.6-stable-queue.patch:
--- NEW FILE linux-2.6-stable-queue.patch ---
Index: linux-2.6.25.noarch/fs/romfs/inode.c
===================================================================
--- linux-2.6.25.noarch.orig/fs/romfs/inode.c
+++ linux-2.6.25.noarch/fs/romfs/inode.c
@@ -418,7 +418,8 @@ static int
romfs_readpage(struct file *file, struct page * page)
{
struct inode *inode = page->mapping->host;
- loff_t offset, avail, readlen;
+ loff_t offset, size;
+ unsigned long filled;
void *buf;
int result = -EIO;
@@ -430,21 +431,29 @@ romfs_readpage(struct file *file, struct
/* 32 bit warning -- but not for us :) */
offset = page_offset(page);
- if (offset < i_size_read(inode)) {
- avail = inode->i_size-offset;
- readlen = min_t(unsigned long, avail, PAGE_SIZE);
- if (romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen) == readlen) {
- if (readlen < PAGE_SIZE) {
- memset(buf + readlen,0,PAGE_SIZE-readlen);
- }
- SetPageUptodate(page);
- result = 0;
+ size = i_size_read(inode);
+ filled = 0;
+ result = 0;
+ if (offset < size) {
+ unsigned long readlen;
+
+ size -= offset;
+ readlen = size > PAGE_SIZE ? PAGE_SIZE : size;
+
+ filled = romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen);
+
+ if (filled != readlen) {
+ SetPageError(page);
+ filled = 0;
+ result = -EIO;
}
}
- if (result) {
- memset(buf, 0, PAGE_SIZE);
- SetPageError(page);
- }
+
+ if (filled < PAGE_SIZE)
+ memset(buf + filled, 0, PAGE_SIZE-filled);
+
+ if (!result)
+ SetPageUptodate(page);
flush_dcache_page(page);
unlock_page(page);
Index: linux-2.6.25.noarch/drivers/scsi/megaraid/megaraid_mbox.c
===================================================================
--- linux-2.6.25.noarch.orig/drivers/scsi/megaraid/megaraid_mbox.c
+++ linux-2.6.25.noarch/drivers/scsi/megaraid/megaraid_mbox.c
@@ -3168,6 +3168,23 @@ megaraid_mbox_support_random_del(adapter
uint8_t raw_mbox[sizeof(mbox_t)];
int rval;
+ /*
+ * Newer firmware on Dell CERC expect a different
+ * random deletion handling, so disable it.
+ */
+ if (adapter->pdev->vendor == PCI_VENDOR_ID_AMI &&
+ adapter->pdev->device == PCI_DEVICE_ID_AMI_MEGARAID3 &&
+ adapter->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
+ adapter->pdev->subsystem_device == PCI_SUBSYS_ID_CERC_ATA100_4CH &&
+ (adapter->fw_version[0] > '6' ||
+ (adapter->fw_version[0] == '6' &&
+ adapter->fw_version[2] > '6') ||
+ (adapter->fw_version[0] == '6'
+ && adapter->fw_version[2] == '6'
+ && adapter->fw_version[3] > '1'))) {
+ con_log(CL_DLEVEL1, ("megaraid: disable random deletion\n"));
+ return 0;
+ }
mbox = (mbox_t *)raw_mbox;
Index: linux-2.6.25.noarch/drivers/scsi/megaraid/megaraid_mbox.h
===================================================================
--- linux-2.6.25.noarch.orig/drivers/scsi/megaraid/megaraid_mbox.h
+++ linux-2.6.25.noarch/drivers/scsi/megaraid/megaraid_mbox.h
@@ -88,6 +88,7 @@
#define PCI_SUBSYS_ID_PERC3_QC 0x0471
#define PCI_SUBSYS_ID_PERC3_DC 0x0493
#define PCI_SUBSYS_ID_PERC3_SC 0x0475
+#define PCI_SUBSYS_ID_CERC_ATA100_4CH 0x0511
#define MBOX_MAX_SCSI_CMDS 128 // number of cmds reserved for kernel
Index: linux-2.6.25.noarch/fs/namei.c
===================================================================
--- linux-2.6.25.noarch.orig/fs/namei.c
+++ linux-2.6.25.noarch/fs/namei.c
@@ -1904,18 +1904,22 @@ struct dentry *lookup_create(struct name
if (IS_ERR(dentry))
goto fail;
+ if (dentry->d_inode)
+ goto eexist;
/*
* Special case - lookup gave negative, but... we had foo/bar/
* From the vfs_mknod() POV we just have a negative dentry -
* all is fine. Let's be bastards - you had / on the end, you've
* been asking for (non-existent) directory. -ENOENT for you.
*/
- if (!is_dir && nd->last.name[nd->last.len] && !dentry->d_inode)
- goto enoent;
+ if (unlikely(!is_dir && nd->last.name[nd->last.len])) {
+ dput(dentry);
+ dentry = ERR_PTR(-ENOENT);
+ }
return dentry;
-enoent:
+eexist:
dput(dentry);
- dentry = ERR_PTR(-ENOENT);
+ dentry = ERR_PTR(-EEXIST);
fail:
return dentry;
}
Index: linux-2.6.25.noarch/drivers/ps3/ps3-lpm.c
===================================================================
--- linux-2.6.25.noarch.orig/drivers/ps3/ps3-lpm.c
+++ linux-2.6.25.noarch/drivers/ps3/ps3-lpm.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/uaccess.h>
+#include <asm/time.h>
#include <asm/ps3.h>
#include <asm/lv1call.h>
#include <asm/cell-pmu.h>
Index: linux-2.6.25.noarch/fs/nfs/inode.c
===================================================================
--- linux-2.6.25.noarch.orig/fs/nfs/inode.c
+++ linux-2.6.25.noarch/fs/nfs/inode.c
@@ -57,8 +57,6 @@ static int enable_ino64 = NFS_64_BIT_INO
static void nfs_invalidate_inode(struct inode *);
static int nfs_update_inode(struct inode *, struct nfs_fattr *);
-static void nfs_zap_acl_cache(struct inode *);
-
static struct kmem_cache * nfs_inode_cachep;
static inline unsigned long
@@ -167,7 +165,7 @@ void nfs_zap_mapping(struct inode *inode
}
}
-static void nfs_zap_acl_cache(struct inode *inode)
+void nfs_zap_acl_cache(struct inode *inode)
{
void (*clear_acl_cache)(struct inode *);
Index: linux-2.6.25.noarch/fs/nfs/internal.h
===================================================================
--- linux-2.6.25.noarch.orig/fs/nfs/internal.h
+++ linux-2.6.25.noarch/fs/nfs/internal.h
@@ -153,6 +153,7 @@ extern void nfs_clear_inode(struct inode
#ifdef CONFIG_NFS_V4
extern void nfs4_clear_inode(struct inode *);
#endif
+void nfs_zap_acl_cache(struct inode *inode);
/* super.c */
extern struct file_system_type nfs_xdev_fs_type;
Index: linux-2.6.25.noarch/fs/nfs/nfs3acl.c
===================================================================
--- linux-2.6.25.noarch.orig/fs/nfs/nfs3acl.c
+++ linux-2.6.25.noarch/fs/nfs/nfs3acl.c
@@ -5,6 +5,8 @@
#include <linux/posix_acl_xattr.h>
#include <linux/nfsacl.h>
+#include "internal.h"
+
#define NFSDBG_FACILITY NFSDBG_PROC
ssize_t nfs3_listxattr(struct dentry *dentry, char *buffer, size_t size)
@@ -205,6 +207,8 @@ struct posix_acl *nfs3_proc_getacl(struc
status = nfs_revalidate_inode(server, inode);
if (status < 0)
return ERR_PTR(status);
+ if (NFS_I(inode)->cache_validity & NFS_INO_INVALID_ACL)
+ nfs_zap_acl_cache(inode);
acl = nfs3_get_cached_acl(inode, type);
if (acl != ERR_PTR(-EAGAIN))
return acl;
@@ -319,9 +323,8 @@ static int nfs3_proc_setacls(struct inod
dprintk("NFS call setacl\n");
msg.rpc_proc = &server->client_acl->cl_procinfo[ACLPROC3_SETACL];
status = rpc_call_sync(server->client_acl, &msg, 0);
- spin_lock(&inode->i_lock);
- NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ACCESS;
- spin_unlock(&inode->i_lock);
+ nfs_access_zap_cache(inode);
+ nfs_zap_acl_cache(inode);
dprintk("NFS reply setacl: %d\n", status);
/* pages may have been allocated at the xdr layer. */
Index: linux-2.6.25.noarch/fs/nfs/nfs4proc.c
===================================================================
--- linux-2.6.25.noarch.orig/fs/nfs/nfs4proc.c
+++ linux-2.6.25.noarch/fs/nfs/nfs4proc.c
@@ -2707,6 +2707,8 @@ static ssize_t nfs4_proc_get_acl(struct
ret = nfs_revalidate_inode(server, inode);
if (ret < 0)
return ret;
+ if (NFS_I(inode)->cache_validity & NFS_INO_INVALID_ACL)
+ nfs_zap_acl_cache(inode);
ret = nfs4_read_cached_acl(inode, buf, buflen);
if (ret != -ENOENT)
return ret;
@@ -2734,7 +2736,8 @@ static int __nfs4_proc_set_acl(struct in
nfs_inode_return_delegation(inode);
buf_to_pages(buf, buflen, arg.acl_pages, &arg.acl_pgbase);
ret = rpc_call_sync(NFS_CLIENT(inode), &msg, 0);
- nfs_zap_caches(inode);
+ nfs_access_zap_cache(inode);
+ nfs_zap_acl_cache(inode);
return ret;
}
Index: linux-2.6.25.noarch/fs/jbd/commit.c
===================================================================
--- linux-2.6.25.noarch.orig/fs/jbd/commit.c
+++ linux-2.6.25.noarch/fs/jbd/commit.c
@@ -407,22 +407,6 @@ void journal_commit_transaction(journal_
jbd_debug (3, "JBD: commit phase 2\n");
/*
- * First, drop modified flag: all accesses to the buffers
- * will be tracked for a new trasaction only -bzzz
- */
- spin_lock(&journal->j_list_lock);
- if (commit_transaction->t_buffers) {
- new_jh = jh = commit_transaction->t_buffers->b_tnext;
- do {
- J_ASSERT_JH(new_jh, new_jh->b_modified == 1 ||
- new_jh->b_modified == 0);
- new_jh->b_modified = 0;
- new_jh = new_jh->b_tnext;
- } while (new_jh != jh);
- }
- spin_unlock(&journal->j_list_lock);
-
- /*
* Now start flushing things to disk, in the order they appear
* on the transaction lists. Data blocks go first.
*/
@@ -488,6 +472,9 @@ void journal_commit_transaction(journal_
*/
commit_transaction->t_state = T_COMMIT;
+ J_ASSERT(commit_transaction->t_nr_buffers <=
+ commit_transaction->t_outstanding_credits);
+
descriptor = NULL;
bufs = 0;
while (commit_transaction->t_buffers) {
Index: linux-2.6.25.noarch/fs/jbd/transaction.c
===================================================================
--- linux-2.6.25.noarch.orig/fs/jbd/transaction.c
+++ linux-2.6.25.noarch/fs/jbd/transaction.c
@@ -609,6 +609,12 @@ repeat:
goto done;
/*
+ * this is the first time this transaction is touching this buffer,
+ * reset the modified flag
+ */
+ jh->b_modified = 0;
+
+ /*
* If there is already a copy-out version of this buffer, then we don't
* need to make another one
*/
@@ -820,9 +826,16 @@ int journal_get_create_access(handle_t *
if (jh->b_transaction == NULL) {
jh->b_transaction = transaction;
+
+ /* first access by this transaction */
+ jh->b_modified = 0;
+
JBUFFER_TRACE(jh, "file as BJ_Reserved");
__journal_file_buffer(jh, transaction, BJ_Reserved);
} else if (jh->b_transaction == journal->j_committing_transaction) {
+ /* first access by this transaction */
+ jh->b_modified = 0;
+
JBUFFER_TRACE(jh, "set next transaction");
jh->b_next_transaction = transaction;
}
@@ -1222,6 +1235,7 @@ int journal_forget (handle_t *handle, st
struct journal_head *jh;
int drop_reserve = 0;
int err = 0;
+ int was_modified = 0;
BUFFER_TRACE(bh, "entry");
@@ -1240,6 +1254,9 @@ int journal_forget (handle_t *handle, st
goto not_jbd;
}
+ /* keep track of wether or not this transaction modified us */
+ was_modified = jh->b_modified;
+
/*
* The buffer's going from the transaction, we must drop
* all references -bzzz
@@ -1257,7 +1274,12 @@ int journal_forget (handle_t *handle, st
JBUFFER_TRACE(jh, "belongs to current transaction: unfile");
- drop_reserve = 1;
+ /*
+ * we only want to drop a reference if this transaction
+ * modified the buffer
+ */
+ if (was_modified)
+ drop_reserve = 1;
/*
* We are no longer going to journal this buffer.
@@ -1297,7 +1319,13 @@ int journal_forget (handle_t *handle, st
if (jh->b_next_transaction) {
J_ASSERT(jh->b_next_transaction == transaction);
jh->b_next_transaction = NULL;
- drop_reserve = 1;
+
+ /*
+ * only drop a reference if this transaction modified
+ * the buffer
+ */
+ if (was_modified)
+ drop_reserve = 1;
}
}
@@ -1620,12 +1648,42 @@ out:
return;
}
+/*
+ * journal_try_to_free_buffers() could race with journal_commit_transaction()
+ * The latter might still hold the a count on buffers when inspecting
+ * them on t_syncdata_list or t_locked_list.
+ *
+ * journal_try_to_free_buffers() will call this function to
+ * wait for the current transaction to finish syncing data buffers, before
+ * tryinf to free that buffer.
+ *
+ * Called with journal->j_state_lock held.
+ */
+static void journal_wait_for_transaction_sync_data(journal_t *journal)
+{
+ transaction_t *transaction = NULL;
+ tid_t tid;
+
+ spin_lock(&journal->j_state_lock);
+ transaction = journal->j_committing_transaction;
+
+ if (!transaction) {
+ spin_unlock(&journal->j_state_lock);
+ return;
+ }
+
+ tid = transaction->t_tid;
+ spin_unlock(&journal->j_state_lock);
+ log_wait_commit(journal, tid);
+}
/**
* int journal_try_to_free_buffers() - try to free page buffers.
* @journal: journal for operation
* @page: to try and free
- * @unused_gfp_mask: unused
+ * @gfp_mask: we use the mask to detect how hard should we try to release
+ * buffers. If __GFP_WAIT and __GFP_FS is set, we wait for commit code to
+ * release the buffers.
*
*
* For all the buffers on this page,
@@ -1654,9 +1712,11 @@ out:
* journal_try_to_free_buffer() is changing its state. But that
* cannot happen because we never reallocate freed data as metadata
* while the data is part of a transaction. Yes?
+ *
+ * Return 0 on failure, 1 on success
*/
int journal_try_to_free_buffers(journal_t *journal,
- struct page *page, gfp_t unused_gfp_mask)
+ struct page *page, gfp_t gfp_mask)
{
struct buffer_head *head;
struct buffer_head *bh;
@@ -1685,7 +1745,28 @@ int journal_try_to_free_buffers(journal_
if (buffer_jbd(bh))
goto busy;
} while ((bh = bh->b_this_page) != head);
+
ret = try_to_free_buffers(page);
+
+ /*
+ * There are a number of places where journal_try_to_free_buffers()
+ * could race with journal_commit_transaction(), the later still
+ * holds the reference to the buffers to free while processing them.
+ * try_to_free_buffers() failed to free those buffers. Some of the
+ * caller of releasepage() request page buffers to be dropped, otherwise
+ * treat the fail-to-free as errors (such as generic_file_direct_IO())
+ *
+ * So, if the caller of try_to_release_page() wants the synchronous
+ * behaviour(i.e make sure buffers are dropped upon return),
+ * let's wait for the current transaction to finish flush of
+ * dirty data buffers, then try to free those buffers again,
+ * with the journal locked.
+ */
+ if (ret == 0 && (gfp_mask & __GFP_WAIT) && (gfp_mask & __GFP_FS)) {
+ journal_wait_for_transaction_sync_data(journal);
+ ret = try_to_free_buffers(page);
+ }
+
busy:
return ret;
}
@@ -2069,7 +2150,7 @@ void __journal_refile_buffer(struct jour
jh->b_transaction = jh->b_next_transaction;
jh->b_next_transaction = NULL;
__journal_file_buffer(jh, jh->b_transaction,
- was_dirty ? BJ_Metadata : BJ_Reserved);
+ jh->b_modified ? BJ_Metadata : BJ_Reserved);
J_ASSERT_JH(jh, jh->b_transaction->t_state == T_RUNNING);
if (was_dirty)
Index: linux-2.6.25.noarch/mm/filemap.c
===================================================================
--- linux-2.6.25.noarch.orig/mm/filemap.c
+++ linux-2.6.25.noarch/mm/filemap.c
@@ -2574,9 +2574,8 @@ out:
* Otherwise return zero.
*
* The @gfp_mask argument specifies whether I/O may be performed to release
- * this page (__GFP_IO), and whether the call may block (__GFP_WAIT).
+ * this page (__GFP_IO), and whether the call may block (__GFP_WAIT & __GFP_FS).
*
- * NOTE: @gfp_mask may go away, and this function may become non-blocking.
*/
int try_to_release_page(struct page *page, gfp_t gfp_mask)
{
Index: linux-2.6.25.noarch/drivers/input/serio/i8042.c
===================================================================
--- linux-2.6.25.noarch.orig/drivers/input/serio/i8042.c
+++ linux-2.6.25.noarch/drivers/input/serio/i8042.c
@@ -938,8 +938,12 @@ static int i8042_resume(struct platform_
i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
- printk(KERN_ERR "i8042: Can't write CTR to resume\n");
- return -EIO;
+ printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n");
+ msleep(50);
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+ printk(KERN_ERR "i8042: CTR write retry failed\n");
+ return -EIO;
+ }
}
if (i8042_mux_present) {
Index: linux-2.6.25.noarch/drivers/input/serio/i8042-x86ia64io.h
===================================================================
--- linux-2.6.25.noarch.orig/drivers/input/serio/i8042-x86ia64io.h
+++ linux-2.6.25.noarch/drivers/input/serio/i8042-x86ia64io.h
@@ -63,7 +63,7 @@ static inline void i8042_write_command(i
outb(val, I8042_COMMAND_REG);
}
-#if defined(__i386__) || defined(__x86_64__)
+#ifdef CONFIG_X86
#include <linux/dmi.h>
@@ -193,6 +193,20 @@ static struct dmi_system_id __initdata i
},
},
{
+ .ident = "Fujitsu-Siemens Amilo Pro 2030",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+ },
+ },
+ {
+ .ident = "Fujitsu-Siemens Amilo Pro 2010",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2010"),
+ },
+ },
+ {
/*
* No data is coming from the touchscreen unless KBC
* is in legacy mode.
@@ -284,17 +298,36 @@ static struct dmi_system_id __initdata i
DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
},
},
+ {
+ .ident = "Acer Aspire 1360",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1360"),
+ },
+ },
{ }
};
-
-
+#ifdef CONFIG_PNP
+static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
+ {
+ .ident = "Intel MBO Desktop D845PESV",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "D845PESV"),
+ DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
+ },
+ },
+ {
+ .ident = "Gericom Bellagio",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Gericom"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N34AS6"),
+ },
+ },
+ { }
+};
#endif
-#ifdef CONFIG_X86
-
-#include <linux/dmi.h>
-
/*
* Some Wistron based laptops need us to explicitly enable the 'Dritek
* keyboard extension' to make their extra keys start generating scancodes.
@@ -342,7 +375,6 @@ static struct dmi_system_id __initdata i
#endif /* CONFIG_X86 */
-
#ifdef CONFIG_PNP
#include <linux/pnp.h>
@@ -452,6 +484,11 @@ static int __init i8042_pnp_init(void)
int pnp_data_busted = 0;
int err;
+#ifdef CONFIG_X86
+ if (dmi_check_system(i8042_dmi_nopnp_table))
+ i8042_nopnp = 1;
+#endif
+
if (i8042_nopnp) {
printk(KERN_INFO "i8042: PNP detection disabled\n");
return 0;
@@ -577,15 +614,13 @@ static int __init i8042_platform_init(vo
i8042_reset = 1;
#endif
-#if defined(__i386__) || defined(__x86_64__)
+#ifdef CONFIG_X86
if (dmi_check_system(i8042_dmi_noloop_table))
i8042_noloop = 1;
if (dmi_check_system(i8042_dmi_nomux_table))
i8042_nomux = 1;
-#endif
-#ifdef CONFIG_X86
if (dmi_check_system(i8042_dmi_dritek_table))
i8042_dritek = 1;
#endif /* CONFIG_X86 */
Index: linux-2.6.25.noarch/fs/fat/inode.c
===================================================================
--- linux-2.6.25.noarch.orig/fs/fat/inode.c
+++ linux-2.6.25.noarch/fs/fat/inode.c
@@ -1209,7 +1209,7 @@ int fat_fill_super(struct super_block *s
*/
media = b->media;
- if (!FAT_VALID_MEDIA(media)) {
+ if (!fat_valid_media(media)) {
if (!silent)
printk(KERN_ERR "FAT: invalid media value (0x%02x)\n",
media);
Index: linux-2.6.25.noarch/include/linux/msdos_fs.h
===================================================================
--- linux-2.6.25.noarch.orig/include/linux/msdos_fs.h
+++ linux-2.6.25.noarch/include/linux/msdos_fs.h
@@ -58,7 +58,11 @@
#define MSDOS_DOTDOT ".. " /* "..", padded to MSDOS_NAME chars */
/* media of boot sector */
-#define FAT_VALID_MEDIA(x) ((0xF8 <= (x) && (x) <= 0xFF) || (x) == 0xF0)
+static inline int fat_valid_media(u8 media)
+{
+ return 0xf8 <= media || media == 0xf0;
+}
+
#define FAT_FIRST_ENT(s, x) ((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
Index: linux-2.6.25.noarch/fs/partitions/msdos.c
===================================================================
--- linux-2.6.25.noarch.orig/fs/partitions/msdos.c
+++ linux-2.6.25.noarch/fs/partitions/msdos.c
@@ -18,7 +18,7 @@
*
* Re-organised Feb 1998 Russell King
*/
-
+#include <linux/msdos_fs.h>
#include "check.h"
#include "msdos.h"
@@ -419,6 +419,7 @@ int msdos_partition(struct parsed_partit
Sector sect;
unsigned char *data;
struct partition *p;
+ struct fat_boot_sector *fb;
int slot;
data = read_dev_sector(bdev, 0, §);
@@ -444,8 +445,21 @@ int msdos_partition(struct parsed_partit
p = (struct partition *) (data + 0x1be);
for (slot = 1; slot <= 4; slot++, p++) {
if (p->boot_ind != 0 && p->boot_ind != 0x80) {
- put_dev_sector(sect);
- return 0;
+ /*
+ * Even without a valid boot inidicator value
+ * its still possible this is valid FAT filesystem
+ * without a partition table.
+ */
+ fb = (struct fat_boot_sector *) data;
+ if (slot == 1 && fb->reserved && fb->fats
+ && fat_valid_media(fb->media)) {
+ printk("\n");
+ put_dev_sector(sect);
+ return 1;
+ } else {
+ put_dev_sector(sect);
+ return 0;
+ }
}
}
Index: linux-2.6.25.noarch/drivers/acpi/bay.c
===================================================================
--- linux-2.6.25.noarch.orig/drivers/acpi/bay.c
+++ linux-2.6.25.noarch/drivers/acpi/bay.c
@@ -299,16 +299,20 @@ static int bay_add(acpi_handle handle, i
*/
pdev->dev.uevent_suppress = 0;
- if (acpi_bay_add_fs(new_bay)) {
- platform_device_unregister(new_bay->pdev);
- goto bay_add_err;
- }
-
/* register for events on this device */
status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
bay_notify, new_bay);
if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Error installing bay notify handler\n");
+ printk(KERN_INFO PREFIX "Error installing bay notify handler\n");
+ platform_device_unregister(new_bay->pdev);
+ goto bay_add_err;
+ }
+
+ if (acpi_bay_add_fs(new_bay)) {
+ acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+ bay_notify);
+ platform_device_unregister(new_bay->pdev);
+ goto bay_add_err;
}
/* if we are on a dock station, we should register for dock
Index: linux-2.6.25.noarch/drivers/acpi/thermal.c
===================================================================
--- linux-2.6.25.noarch.orig/drivers/acpi/thermal.c
+++ linux-2.6.25.noarch/drivers/acpi/thermal.c
@@ -359,10 +359,17 @@ static int acpi_thermal_trips_update(str
if (flag & ACPI_TRIPS_CRITICAL) {
status = acpi_evaluate_integer(tz->device->handle,
"_CRT", NULL, &tz->trips.critical.temperature);
- if (ACPI_FAILURE(status)) {
+ /*
+ * Treat freezing temperatures as invalid as well; some
+ * BIOSes return really low values and cause reboots at startup.
+ * Below zero (Celcius) values clearly aren't right for sure..
+ * ... so lets discard those as invalid.
+ */
+ if (ACPI_FAILURE(status) ||
+ tz->trips.critical.temperature <= 2732) {
tz->trips.critical.flags.valid = 0;
ACPI_EXCEPTION((AE_INFO, status,
- "No critical threshold"));
+ "No or invalid critical threshold"));
return -ENODEV;
} else {
tz->trips.critical.flags.valid = 1;
Index: kernel.spec
===================================================================
RCS file: /cvs/pkgs/rpms/kernel/F-8/kernel.spec,v
retrieving revision 1.507
retrieving revision 1.508
diff -u -r1.507 -r1.508
--- kernel.spec 1 Aug 2008 21:36:30 -0000 1.507
+++ kernel.spec 4 Aug 2008 05:19:00 -0000 1.508
@@ -401,7 +401,7 @@
# problems with the newer kernel or lack certain things that make
# integration in the distro harder than needed.
#
-%define package_conflicts initscripts < 7.23, udev < 063-6, iptables < 1.3.2-1, ipw2200-firmware < 2.4, selinux-policy-targeted < 1.25.3-14
+%define package_conflicts initscripts < 7.23, udev < 063-6, iptables < 1.3.2-1, ipw2200-firmware < 2.4, iwl4965-firmware < 228.57.2, selinux-policy-targeted < 1.25.3-14
#
# The ld.so.conf.d file we install uses syntax older ldconfig's don't grok.
@@ -567,6 +567,8 @@
# revert upstream changes we get from elsewhere
Patch05: linux-2.6-upstream-reverts.patch
+# patches queued for the next -stable release
+Patch11: linux-2.6-stable-queue.patch
Patch21: linux-2.6-utrace.patch
Patch22: linux-2.6.25-utrace-bugon.patch
@@ -986,6 +988,7 @@
# Revert -stable pieces we get from elsewhere here
ApplyPatch linux-2.6-upstream-reverts.patch -R
+ApplyPatch linux-2.6-stable-queue.patch
# Roland's utrace ptrace replacement.
ApplyPatch linux-2.6-utrace.patch
@@ -1832,6 +1835,10 @@
%changelog
+* Sun Aug 03 2008 Chuck Ebbert <cebbert at redhat.com> 2.6.25.14-68
+- Add patches queued for 2.6.25.15.
+- Add conflict against older iwl4965 firmware.
+
* Fri Aug 01 2008 Chuck Ebbert <cebbert at redhat.com> 2.6.25.14-67
- Linux 2.6.25.14
Dropped patches:
More information about the fedora-extras-commits
mailing list