Ethernet

[bulent]

jludwig wrote:

>On Tue, 2004-04-13 at 03:02, bulent wrote:
>  
>
>>Jeff Vian wrote:
>>
>>    
>>
>>>So your problem is ???????
>>>
>>>bulent wrote:
>>>
>>>      
>>>
>>>>Eric Diamond wrote:
>>>>
>>>>        
>>>>
>>>>>Wednesday, April 07, 2004 3:57 AM Bülent Açy'kgöz
>>>>>wrote:
>>>>> 
>>>>>
>>>>>          
>>>>>
>>>>>>Alexander Dalloz wrote:
>>>>>>
>>>>>> 
>>>>>>
>>>>>>            
>>>>>>
>>>>>>>>      Link detected: no
>>>>>>>>      
>>>>>>>>                
>>>>>>>>
>>>>>>>                           ^^^^^
>>>>>>>You see that? You have no link, thus you can not
>>>>>>>    
>>>>>>>              
>>>>>>>
>>>>>>            
>>>>>>
>>>>>successfully change 
>>>>>
>>>>>          
>>>>>
>>>>>>>anything.
>>>>>>>
>>>>>>>...snip...
>>>>>>>
>>>>>>>Still no link! Check your cables. Check the other
>>>>>>>    
>>>>>>>              
>>>>>>>
>>>>>>            
>>>>>>
>>>>>side of the cable, 
>>>>>
>>>>>          
>>>>>
>>>>>>>check the plug in the switch/hub/router or where it
>>>>>>>    
>>>>>>>              
>>>>>>>
>>>>>>            
>>>>>>
>>>>>is.
>>>>> 
>>>>>
>>>>>          
>>>>>
>>>>>>No I have link , Because I am downloading eveything
>>>>>>  
>>>>>>            
>>>>>>
>>>>>also 
>>>>>
>>>>>          
>>>>>
>>>>>>working samba and others.
>>>>>>Do you have any suggesstion?
>>>>>>
>>>>>>  
>>>>>>            
>>>>>>
>>>>>
>>>>>Bülent,
>>>>>
>>>>>Could you please post your 'ifconfig -a' output?
>>>>>
>>>>>Eric Diamond
>>>>>eDiamond Networking & Security
>>>>>303-246-9555
>>>>>eric at ediamond.net
>>>>>
>>>>>
>>>>>
>>>>> 
>>>>>
>>>>>          
>>>>>
>>>>Hello, ifconfig output like this;
>>>>
>>>>[root at sbe-60 root]# ifconfig -a
>>>>eth0      Link encap:Ethernet  HWaddr 00:02:44:66:D3:32
>>>>         inet addr:144.122.85.60  Bcast:144.122.85.255  
>>>>Mask:255.255.255.0
>>>>         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>>>         RX packets:301403 errors:0 dropped:0 overruns:0 frame:0
>>>>         TX packets:115798 errors:14 dropped:0 overruns:0 carrier:0
>>>>         collisions:0 txqueuelen:1000
>>>>         RX bytes:51269291 (48.8 Mb)  TX bytes:119416712 (113.8 Mb)
>>>>         Interrupt:11 Base address:0xec00
>>>>
>>>>lo        Link encap:Local Loopback
>>>>         inet addr:127.0.0.1  Mask:255.0.0.0
>>>>         UP LOOPBACK RUNNING  MTU:16436  Metric:1
>>>>         RX packets:54794 errors:0 dropped:0 overruns:0 frame:0
>>>>         TX packets:54794 errors:0 dropped:0 overruns:0 carrier:0
>>>>         collisions:0 txqueuelen:0
>>>>         RX bytes:101928795 (97.2 Mb)  TX bytes:101928795 (97.2 Mb)
>>>>
>>>>also,
>>>>root at sbe-60 root]# mii-tool eth0
>>>>eth0: 10 Mbit, half duplex, no link
>>>>[root at sbe-60 root]# ping 144.122.199.20
>>>>PING 144.122.199.20 (144.122.199.20) 56(84) bytes of data.
>>>>64 bytes from 144.122.199.20: icmp_seq=0 ttl=63 time=1.69 ms
>>>>64 bytes from 144.122.199.20: icmp_seq=1 ttl=63 time=1.39 ms
>>>>64 bytes from 144.122.199.20: icmp_seq=2 ttl=63 time=1.45 ms
>>>>64 bytes from 144.122.199.20: icmp_seq=3 ttl=63 time=1.27 ms
>>>>64 bytes from 144.122.199.20: icmp_seq=4 ttl=63 time=1.56 ms
>>>>64 bytes from 144.122.199.20: icmp_seq=5 ttl=63 time=1.50 ms
>>>>64 bytes from 144.122.199.20: icmp_seq=6 ttl=63 time=1.58 ms
>>>>
>>>>
>>>>Thank you...
>>>>
>>>>        
>>>>
>>>      
>>>
>>My porblem like this;
>>
>>root at sbe-60 root]# mii-tool eth0
>>eth0: 10 Mbit, half duplex, no link
>>
>>as you see, there is "no link" warning , what does  it mean?
>>and I didn't change 10Mbit to 100Mbit with mii-tool.
>>Do you have any suggestion?
>>
>>-- 
>>Bülent Açikgöz
>>DBA & Sytem Administrator
>>
>>Mobile: +90 532 5639505
>>Work  : +90 312 2103810
>>Adress: ODTU MM Binasi 3.Kat No:320 
>>Balgat/ANKARA/TURKIYE
>>
>>There is no crueler tyranny than that which is perpetrated under the shield of law and in the name of justice.
>>    
>>
>
>No link means "something is broke". 
>This could be a cable, transciever on the NIC card (The card self check
>cannot check the drivers that connect to the outside world, the
>loop-back in the chip happens before this point.) or on the other end. 
>It is also possible if you have more than one card to have the
>configuration of the cards scrambled somewhere -- S.A the MAC bindings
>or module alias. 
>
>  
>
I have only one ethernet card eth0.

-- 
Bülent Açikgöz
DBA & Sytem Administrator

Mobile: +90 532 5639505
Work  : +90 312 2103810
Adress: ODTU MM Binasi 3.Kat No:320 
Balgat/ANKARA/TURKIYE

There is no crueler tyranny than that which is perpetrated under the shield of law and in the name of justice.