[SOLVED] Re: FC2 + k3b + LG GCC-4521B DVD+CDRW combo anyone?
Andre Costa
acosta at ar.microlink.com.br
Sat Aug 14 13:54:42 UTC 2004
On Fri, 13 Aug 2004 22:52:58 -0700
RoboticGolem <roboticgolem at gmail.com> wrote:
> Well, it wont be in the reader section because it is a recorder.
... so, how am I supposed to use "copy cd" feature? =) I don't have two
separate cdrom units (one burner and one reader)...
> I'm
> assuming you've tried to use it as a reader with k3b and it didnt
> work?
Exactly.
> If you still cant get it to work, you could try the old
> hdx=ide-scsi and try it. (dont know if fc2 comes with it built in
> tho)
Mmmh... I've been reading that hdx=ide-scsi is not advisable on 2.6.x
kernels. So, I thought there should be some other way.
> Does cdrdao or cdda-wav work manually?
Yes -- well, at least, sort of:
==========
cdrdao disk-info --driver generic-mmc-raw --device ATA:1,0,0
Cdrdao version 1.1.8 - (C) Andreas Mueller <andreas at daneb.de>
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver
tables.
Using libscg version 'schily-0.8'
ATA:1,0,0: HL-DT-ST RW/DVD GCC-4521B Rev: 1.03
Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options
0x0000)
That data below may not reflect the real status of the inserted medium
if a simulation run was performed before. Reload the medium in this
case.
CD-RW : no
Total Capacity : n/a
CD-R medium : n/a
Recording Speed : n/a
CD-R empty : no
Toc Type : CD-DA or CD-ROM
Sessions : 1
Last Track : 1
Appendable : no
==========
cdrdao did not get all information from the disk (like total capacity).
Still, it is reading the device:
==========
cdrdao read-toc --driver generic-mmc-raw --device ATA:1,0,0 aaa
Cdrdao version 1.1.8 - (C) Andreas Mueller <andreas at daneb.de>
SCSI interface library - (C) Joerg Schilling
Paranoia DAE library - (C) Monty
Check http://cdrdao.sourceforge.net/drives.html#dt for current driver
tables.
Using libscg version 'schily-0.8'
ATA:1,0,0: HL-DT-ST RW/DVD GCC-4521B Rev: 1.03
Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options
0x0000)
Reading toc data...
Track Mode Flags Start Length
------------------------------------------------------------
1 DATA 4 00:00:00( 0) 68:14:54(307104)
Leadout DATA 4 68:14:54(307104)
PQ sub-channel reading (data track) is supported, data format is BCD.
Raw P-W sub-channel reading (data track) is supported.
Analyzing track 01 (MODE1): start 00:00:00, length 68:14:54...
Reading of toc data finished successfully.
==========
cdda2wav works just fine, and it doesn't even need extra parameters.
> Have you run the k3b-setup proggy?
Yes. It can't seem to correctly identify this unit's specs, though
(like max recording speed etc.). xcdroast does it just fine.
> Does k3b give you any messages at all on startup?
Yes, it always complains it could not determine max recording speed and
asks me to define it manually.
Best,
Andre
--
Andre Oliveira da Costa
More information about the fedora-list
mailing list