Raid0 Raid1 boot problem.

[Chris Miller]

On Wed, 2004-08-11 at 21:51, Alexander Dalloz wrote:
> Am Do, den 12.08.2004 schrieb Chris Miller um 3:19:
> 
> [ rearranged - please don't top-post ]
>  
> > > >   I did a install with a 4 drive raid5 but after some playing I wanted
> > > > to make 2 raid1's and then make them a raid0.  So here is my problem.  
> > > > When I reboot and do a lsmod I get.
> > > 
> > > > My raidtab is right but the modules do not load at boot time.  Any
> > > > ideas?
> > > 
> > > Create a new initial ramdisk image using mkinitrd, which contains the
> > > wanted raid modules.
> 
> >When I do that it looks like the modules load b4 the scsi does and I
> get
> > the modules load but still no raid at boot.
> 
> So the modules are loaded at boot time? You list them with lsmod? The partitions used for the raid arrays have partition type "fd"? The raid array work proper if you do the raidstart manually?
> 
> Alexander
> 
Ok 
I rebuilt my initrd and did a reboot.   The modules load up right not. 
All 4 drives are fd.  My two raid1 start up.  They are md0 and md1 but
my raid0 md2 does not start.  md2 uses md0 and md1.  If I start it by
hand it works.  On boot I see it say md2 is skipped.  Not sure why.