can't change screen resolution
Pietro R.A. Binetti
binabin at libero.it
Fri Aug 27 19:40:13 UTC 2004
I didn't change anything yet. Down here you can read the copy of my
/var/log/Xorg.0.log file.
Actually I can see the problem: there is a line that says:
(II) TRIDENT(0): Removing mode (1024x768) larger than the LCD panel
(800x600)
Is it possible? Before Fedora, I had windows on this same machine, and I
was used to work with 1024x768 resolution.
I don't know what I shoud do, then.
About the touch pad: is this one (Xorg.o.log) the log file you need to
find out any problem? if not, just tell me. thanks.
copy of Xorg.0.log file:
Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: Linux 2.4.21-14.ELsmp i686 [ELF]
Current Operating System: Linux localhost.localdomain 2.6.8-1.521 #1 Mon
Aug 16 09:01:18 EDT 2004 i686
Build Date: 26 June 2004
Build Host: tweety.build.redhat.com
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.8-1.521 (bhcompile at tweety.build.redhat.com)
(gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Mon Aug 16
09:01:18 EDT 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 27 21:14:03 2004
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "single head configuration"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "it"
(**) XKB: layout: "it"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10b9,1621 card 0000,0000 rev 01 class 06,00,00
hdr 00
(II) PCI: 00:01:0: chip 10b9,5247 card 0000,0000 rev 01 class 06,04,00
hdr 01
(II) PCI: 00:06:0: chip 10b9,5451 card 1025,1019 rev 01 class 04,01,00
hdr 00
(II) PCI: 00:07:0: chip 10b9,1533 card 1025,1019 rev 00 class 06,01,00
hdr 00
(II) PCI: 00:10:0: chip 10b9,5229 card 1025,1019 rev c3 class 01,01,fa
hdr 00
(II) PCI: 00:11:0: chip 10b9,7101 card 1025,1019 rev 00 class 06,80,00
hdr 00
(II) PCI: 00:13:0: chip 1217,6872 card 4001,0000 rev 05 class 06,07,00
hdr 02
(II) PCI: 00:14:0: chip 10b9,5237 card 1025,1019 rev 03 class 0c,03,10
hdr 00
(II) PCI: 01:00:0: chip 1023,8620 card 1025,1019 rev 5d class 03,00,00
hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0x80100000 - 0x818fffff (0x1800000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is
set)
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:19:0), (0,2,5), BCTRL: 0x0580 (VGA_EN is
cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x10800000 - 0x10bfffff (0x400000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x10400000 - 0x107fffff (0x400000) MX[B]
(--) PCI:*(1:0:0) Trident Microsystems CyberBlade/i1 rev 93, Mem @
0x80800000/23, 0x80100000/17, 0x81000000/23, BIOS @ 0x80120000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to
0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0x81c00000 - 0x81c00fff (0x1000) MX[B]
[1] -1 0 0x81a00000 - 0x81a00fff (0x1000) MX[B]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[3] -1 0 0x80120000 - 0x8012ffff (0x10000) MX[B](B)
[4] -1 0 0x81000000 - 0x817fffff (0x800000) MX[B](B)
[5] -1 0 0x80100000 - 0x8011ffff (0x20000) MX[B](B)
[6] -1 0 0x80800000 - 0x80ffffff (0x800000) MX[B](B)
[7] -1 0 0x00007050 - 0x0000705f (0x10) IX[B]
[8] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x81c00000 - 0x81c00fff (0x1000) MX[B]
[1] -1 0 0x81a00000 - 0x81a00fff (0x1000) MX[B]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[3] -1 0 0x80120000 - 0x8012ffff (0x10000) MX[B](B)
[4] -1 0 0x81000000 - 0x817fffff (0x800000) MX[B](B)
[5] -1 0 0x80100000 - 0x8011ffff (0x20000) MX[B](B)
[6] -1 0 0x80800000 - 0x80ffffff (0x800000) MX[B](B)
[7] -1 0 0x00007050 - 0x0000705f (0x10) IX[B]
[8] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x81c00000 - 0x81c00fff (0x1000) MX[B]
[6] -1 0 0x81a00000 - 0x81a00fff (0x1000) MX[B]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[8] -1 0 0x80120000 - 0x8012ffff (0x10000) MX[B](B)
[9] -1 0 0x81000000 - 0x817fffff (0x800000) MX[B](B)
[10] -1 0 0x80100000 - 0x8011ffff (0x20000) MX[B](B)
[11] -1 0 0x80800000 - 0x80ffffff (0x800000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00007050 - 0x0000705f (0x10) IX[B]
[15] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.0.2
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.7.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "trident"
(II) Loading /usr/X11R6/lib/modules/drivers/trident_drv.o
(II) Module trident: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i,
tvga8900c,
tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397,
cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi,
tgui9440agi, tgui9660, tgui9680, providia9682, providia9685,
cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7,
cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1,
cyberbladeAi1d, bladeXP, cyberbladeXPAi1, cyberbladeXP4
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset cyberbladeAi1d found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x81c00000 - 0x81c00fff (0x1000) MX[B]
[6] -1 0 0x81a00000 - 0x81a00fff (0x1000) MX[B]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[8] -1 0 0x80120000 - 0x8012ffff (0x10000) MX[B](B)
[9] -1 0 0x81000000 - 0x817fffff (0x800000) MX[B](B)
[10] -1 0 0x80100000 - 0x8011ffff (0x20000) MX[B](B)
[11] -1 0 0x80800000 - 0x80ffffff (0x800000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00007050 - 0x0000705f (0x10) IX[B]
[15] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x81c00000 - 0x81c00fff (0x1000) MX[B]
[6] -1 0 0x81a00000 - 0x81a00fff (0x1000) MX[B]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[8] -1 0 0x80120000 - 0x8012ffff (0x10000) MX[B](B)
[9] -1 0 0x81000000 - 0x817fffff (0x800000) MX[B](B)
[10] -1 0 0x80100000 - 0x8011ffff (0x20000) MX[B](B)
[11] -1 0 0x80800000 - 0x80ffffff (0x800000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00007050 - 0x0000705f (0x10) IX[B]
[18] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]
[19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) TRIDENT(0): Depth 24, (--) framebuffer bpp 32
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) TRIDENT(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset
is 0x0000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(==) TRIDENT(0): RGB weight 888
(==) TRIDENT(0): Default visual is TrueColor
(==) TRIDENT(0): Using gamma correction (1.0, 1.0, 1.0)
(==) TRIDENT(0): Linear framebuffer at 0x80800000
(--) TRIDENT(0): IO registers at 0x80100000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) TRIDENT(0): initializing int10
(II) TRIDENT(0): Primary V_BIOS segment is: 0xc000
(II) TRIDENT(0): VESA BIOS detected
(II) TRIDENT(0): VESA VBE Version 2.0
(II) TRIDENT(0): VESA VBE Total Mem: 8192 kB
(II) TRIDENT(0): VESA VBE OEM: Trident CYBER 8620
(II) TRIDENT(0): VESA VBE OEM Software Rev: 2.0
(II) TRIDENT(0): VESA VBE OEM Vendor: TRIDENT MICROSYSTEMS INC.
(II) TRIDENT(0): VESA VBE OEM Product: CYBER 8620
(II) TRIDENT(0): VESA VBE OEM Product Rev: BTA 7.0 (04.15)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) TRIDENT(0): VESA VBE DDC read failed
(--) TRIDENT(0): Revision is 122
(--) TRIDENT(0): Found CyberBlade/DSTN/Ai1 chip
(--) TRIDENT(0): RAM type is SDRAM
(--) TRIDENT(0): Using SW cursor
(--) TRIDENT(0): VideoRAM: 8192 kByte
(--) TRIDENT(0): TFT Panel 800x600 found
(--) TRIDENT(0): Memory Clock is 100.23 MHz
(==) TRIDENT(0): Min pixel clock is 12 MHz
(--) TRIDENT(0): Max pixel clock is 115 MHz
(II) TRIDENT(0): Monitor0: Using hsync range of 31.50-48.50 kHz
(II) TRIDENT(0): Monitor0: Using vrefresh range of 40.00-70.00 Hz
(II) TRIDENT(0): Clock range: 12.00 to 115.00 MHz
(II) TRIDENT(0): Not using default mode "640x350" (vrefresh out of
range)
(II) TRIDENT(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "640x400" (vrefresh out of
range)
(II) TRIDENT(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "720x400" (vrefresh out of
range)
(II) TRIDENT(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "640x480" (vrefresh out of
range)
(II) TRIDENT(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "640x480" (vrefresh out of
range)
(II) TRIDENT(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "640x480" (vrefresh out of
range)
(II) TRIDENT(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (vrefresh out of
range)
(II) TRIDENT(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (vrefresh out of
range)
(II) TRIDENT(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1024x768) larger than the LCD panel
(800x600)
(II) TRIDENT(0): Not using default mode "1024x768" (unknown reason)
(II) TRIDENT(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1024x768) larger than the LCD panel
(800x600)
(II) TRIDENT(0): Not using default mode "1024x768" (unknown reason)
(II) TRIDENT(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1024x768) larger than the LCD panel
(800x600)
(II) TRIDENT(0): Not using default mode "1024x768" (unknown reason)
(II) TRIDENT(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1024x768) larger than the LCD panel
(800x600)
(II) TRIDENT(0): Not using default mode "1024x768" (unknown reason)
(II) TRIDENT(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1024x768) larger than the LCD panel
(800x600)
(II) TRIDENT(0): Not using default mode "1024x768" (unknown reason)
(II) TRIDENT(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel
(800x600)
(II) TRIDENT(0): Not using default mode "1152x864" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1280x960) larger than the LCD panel
(800x600)
(II) TRIDENT(0): Not using default mode "1280x960" (unknown reason)
(II) TRIDENT(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1280x960" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1280x1024) larger than the LCD panel
(800x600)
(II) TRIDENT(0): Not using default mode "1280x1024" (unknown reason)
(II) TRIDENT(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1280x1024" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1280x1024" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1792x1344" (insufficient memory
for mode)
(II) TRIDENT(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1792x1344" (insufficient memory
for mode)
(II) TRIDENT(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1856x1392" (insufficient memory
for mode)
(II) TRIDENT(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1856x1392" (insufficient memory
for mode)
(II) TRIDENT(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory
for mode)
(II) TRIDENT(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory
for mode)
(II) TRIDENT(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (832x624) larger than the LCD panel
(800x600)
(II) TRIDENT(0): Not using default mode "832x624" (unknown reason)
(II) TRIDENT(0): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1152x768) larger than the LCD panel
(800x600)
(II) TRIDENT(0): Not using default mode "1152x768" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x384" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1152x864" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1400x1050" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Removing mode (1600x1024) larger than the LCD panel
(800x600)
(II) TRIDENT(0): Not using default mode "1600x1024" (unknown reason)
(II) TRIDENT(0): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1920x1200" (insufficient memory
for mode)
(II) TRIDENT(0): Not using default mode "960x600" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory
for mode)
(II) TRIDENT(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory
for mode)
(II) TRIDENT(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory
for mode)
(II) TRIDENT(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory
for mode)
(II) TRIDENT(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) TRIDENT(0): Not using mode "1024x768" (no mode of this name)
(--) TRIDENT(0): Virtual size is 800x600 (pitch 800)
(**) TRIDENT(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) TRIDENT(0): Modeline "800x600" 40.00 800 840 968 1056 600 601
605 628 +hsync +vsync
(**) TRIDENT(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) TRIDENT(0): Modeline "640x480" 25.20 640 656 752 800 480 490
492 525 -hsync -vsync
(**) TRIDENT(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) TRIDENT(0): Modeline "800x600" 36.00 800 824 896 1024 600 601
603 625 +hsync +vsync
(==) TRIDENT(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.7.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x81000000 - 0x817fffff (0x800000) MX[B]
[1] 0 0 0x80100000 - 0x8011ffff (0x20000) MX[B]
[2] 0 0 0x80800000 - 0x80ffffff (0x800000) MX[B]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0x81c00000 - 0x81c00fff (0x1000) MX[B]
[9] -1 0 0x81a00000 - 0x81a00fff (0x1000) MX[B]
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[11] -1 0 0x80120000 - 0x8012ffff (0x10000) MX[B](B)
[12] -1 0 0x81000000 - 0x817fffff (0x800000) MX[B](B)
[13] -1 0 0x80100000 - 0x8011ffff (0x20000) MX[B](B)
[14] -1 0 0x80800000 - 0x80ffffff (0x800000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00007050 - 0x0000705f (0x10) IX[B]
[21] -1 0 0x00008000 - 0x000080ff (0x100) IX[B]
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) TRIDENT(0): Write-combining range (0x80800000,0x800000)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) TRIDENT(0): Initializing int10
(II) TRIDENT(0): Primary V_BIOS segment is: 0xc000
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow off
(II) TRIDENT(0): H-timing shadow registers: 0x7f 0x00 0x69
0x7f
(II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x00 0x69
0x7f
(II) TRIDENT(0): V-timing shadow registers: 0x72 0xf0 0x59
0x0d 0x00 (0x08)
(II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x0d 0x57
0x00 0x00
(II) TRIDENT(0): Setting BIOS Mode: 6d for: 800x600
(II) TRIDENT(0): Found Clock 80.00 n=249 m=21 k=1
(II) TRIDENT(0): Using 1447 scanlines of offscreen memory for area's
(II) TRIDENT(0): Using 1838208 bytes of offscreen memory for linear
(offset=0x63f380)
(II) TRIDENT(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
8 256x256 slots
(==) TRIDENT(0): Backing store disabled
(**) Option "dpms"
(**) TRIDENT(0): DPMS enabled
(II) TRIDENT(0): Trident Video Flags: VID_ZOOM_INV
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "IMPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "yes"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: ps2EnableDataReporting: succeeded
GetModeLine - scrn: 0 clock: 40000
GetModeLine - hdsp: 800 hbeg: 840 hend: 968 httl: 1056
vdsp: 600 vbeg: 601 vend: 605 vttl: 628 flags: 5
> Message: 3
> Date: Fri, 27 Aug 2004 09:27:37 -0500
> From: "Molina, Tom" <tmolina at cablespeed.com>
> On Fri, 27 Aug 2004 15:30:16 +0200
> "Pietro R.A. Binetti" <binabin at libero.it> wrote:
> >I hope to correctly answer you: the detected hardware is
> >the following
> >
> >Video card: Trident CyberBlade (generic)
> >Monitor Type: LCD Panel 1024x768
> >
> >I can change the Monitor type from Display settings
> >option panel, and if
> >I do that, the new values are remembred: I don't have to
> >reconfigure
> >every time. i read the new values in the Display
> >settings, but the don't
> >correspond to the truth. For instance, I am now reading
> >1024x768, but i
> >see the screen with 800x600 resolution.
>
> Sometimes this problem is caused by lack of video memory.
> If your video card is "stealing" from main system memory
> and there isn't enough memory for the higher resolution
> you won't be able to use that resolution. You might try
> going into your BIOS setup and examining video memory use.
> Increase the amount of video memory in use and try again.
>
>
>
> ------------------------------
>
> On Fri, 2004-08-27 at 15:30 +0200, Pietro R.A. Binetti wrote:
> > I hope to correctly answer you: the detected hardware is the following
> >
> > Video card: Trident CyberBlade (generic)
> > Monitor Type: LCD Panel 1024x768
> >
> > I can change the Monitor type from Display settings option panel, and if
> > I do that, the new values are remembred: I don't have to reconfigure
> > every time. i read the new values in the Display settings, but the don't
> > correspond to the truth. For instance, I am now reading 1024x768, but i
> > see the screen with 800x600 resolution.
>
> As Tom suggested, it may be a problem with available memory. As well as
> changing (or instead of) the amount of memory the graphics card is given
> from "main memory", you could try reducing the "colour depth" to 256
> colours to test if this is a problem. You could do this with out having
> to change the BIOS :)
>
> A good place to start when trying to trouble shoot are log files, these
> can almost always be found in /var/log. You will be looking for the Xorg
> log files which are /var/log/Xorg.0.log
>
> If you can't see any problems then post a copy of the log file to the
> list and we can try and read it for you (if it's not in english I'll be
> unable to assist).
>
> > Speaking about the upgrade, I launch the automatic upgrade every time I
> > see the alert icon in the tray switching on. My system is always updated
> > this way. Were you talking about these kind of updates, right?
> > I update my pc this way, since I have a DSL connection.
>
> Yes this is what I meant, however I was unsure how new you were, and I
> felt describing a "yum update" would be easier for me.
>
> > The touch pad, finally, is still a mistery to me...
> >
> > I hope you have more information in order to help me out solving my
> > problems.
>
> Not too much yet, but the log file will probably help quite a lot.
>
> > Regards,
> > Pietro
>
>
> --
> Douglas Furlong
> Systems Administrator
> Firebox.com
> T: 0870 420 4475 F: 0870 220 2178
thanks for your help,
Pietro
More information about the fedora-list
mailing list