Problems remotely changing IP address of second NIC

[Rodolfo Alcázar]

El jue, 02-12-2004 a las 16:06 -0500, Seth Art escribió:

> Now that i have giving you some more insite.  Here are all the details: 
...
good, now that's better. /etc/sysconfig/network-scripts/ifcfg-eth3
syntax must include DEVICE=eth3, the same pair with
eth0. /etc/sysconfig/network must include GATEWAY=192.9.200.2, but:

probably the error is some routing problem. Now you are blocked, can you
ask someone to print your routing table (route -n) before correcting the
error? 

if this is the error, use /etc/sysconfig/network-scripts/route-eth0
and ...eth3 to set your routes, example:
your_network_1/24 via 192.9.200.2
your_network_2/24 via 192.168.218.2
your_network_3/24 via 192.168.218.2
...

> I hope i have given you enough details without boring you.  

better! good luck!

-- 
Rodolfo Alcázar (rodolfo.alcazar at padep.org.bo)
Administrador datos y red - Padep/GTZ
La Paz, Bolivia