Usb scanner problem

[Vinicius]

Jim Cornette escreveu:
> david walcroft wrote:
> 
>> Jim Cornette wrote:
>>
>>> david walcroft wrote:
>>>
>>>> Hi,
>>>>   I have had a scanning problem since moving up to FC3 from FC2 and
>>>> that is it is not identified by gimp,kooka and so on.
>>>> ptal-init sets it up and :-
>>>>
>>>> [david at reddwarf ~]$ sane-find-scanner
>>>> found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x2811 
>>>> [PSC 2100 Series]) at libusb:003:003
>>>>
>>>> but :
>>>>
>>>> [david at reddwarf ~]$ scanimage -L
>>>> scanimage: hp-option.c:3710: hp_optset_fix_geometry_options: 
>>>> Assertion `tl_x && tl_y && br_x && br_y' failed.
>>>> Aborted
>>>>
>>>> software is uptodate
>>>> [david at reddwarf ~]$ rpm -q hpoj
>>>> hpoj-0.91-11
>>>> [david at reddwarf ~]$ rpm -qa | grep sane
>>>> sane-frontends-1.0.12-4
>>>> sane-backends-devel-1.0.14-6
>>>> sane-backends-1.0.14-6
>>>> xsane-gimp-0.92-13
>>>> xsane-0.92-13
>>>>
>>>> Any ideas anyone....
>>>>
>>>> Thanks  david
>>>>
>>>
>>> Try adding the testing repo to your repositories to get the latest 
>>> programs. I have an hp 2100 scanner and it seems to work alright in FC3.
>>>
>>> I'm not sure what the hpoj has to do with the scanner.
>>>
>>> Jim
>>>
>>> Refer to below bug report for needed packages.
>>> https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121511
>>>
>>>
>> Jim
>>    I just added my 2c to the bug as updating to updates-testing  
>> hasn't worked,hpoj and
>> hpijs together handle print and scan requirements.
>>
>>     Thanks  david
>>
> 
> I have a scanner that is seperate. It is not a scanner printer 
> combination. It is an HP 2100C model flatbed scanner and works fine with 
> the testing versions of the suggested programs installed.
> 
> Since I don't have a combination unit and do not know if there are 
> seperate usb device nodes for the scanner and another for the printer or 
> if they use the same usb node for each device. It makes more sense to me 
> for the devices to have seperate nodes per device. Could it be that the 
> node for the scanner portion is not being set to the right setting?
> 
> sane-backends-1.0.15-1.4
> hotplug-2004_04_01-8.1
> pam-0.77-66.1
> 
> Are the program versions that are supposed to get the permissions setup 
> correctly? It looks like you have these versions installed from the 
> addition to the bug report.
> 
> Sorry that this remedy couldn't fix your problem. It sounds like hpijs 
> is not being loaded correctly. You might try searching bugzilla for 
> multi-function device entries.
> 
> Jim
> 

Hi,

I've a HP PSC 1315 and I've installed the HPLIP driver 
(http://hpinkjet.sourceforge.net/index.php), so the scanner works fine 
with xsane.

Best regards,
Vinicius.