new kernel and NIC

Dave Jones davej at redhat.com
Thu Feb 12 13:45:09 UTC 2004


On Thu, Feb 12, 2004 at 07:47:03AM -0500, Tuttle, Victoria E wrote:
 > 138,148c138,140
 > < PCI: Found IRQ 11 for device 00:0d.0
 > < 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
 > < See Documentation/networking/vortex.txt
 > < 00:0d.0: 3Com PCI 3c905B Cyclone 10/100/BNC at 0x2080. Vers LK1.1.18-ac
 > <  00:04:76:2e:e6:e7, IRQ 11
 > <   product code 4d52 rev 00.0 date 02-05-01
 > <   Internal config register is 1800000, transceivers 0x3a.
 > <   8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
 > <   MII transceiver found at address 24, status 782d.
 > <   Enabling bus-master transmits and whole-frame receives.
 > < 00:0d.0: scatter/gather enabled. h/w checksums enabled
 > ---
 > > pci-scan.c:v1.12 7/30/2003  Donald Becker <becker at scyld.com>
 > http://www.scyld.com/linux/drivers.html
 > > 3c59x.c:v0.99Za 4/17/2003 Donald Becker, becker at scyld.com
 > >   http://www.scyld.com/network/vortex.html
 > 149a142,145
 > > eth0: 3Com 3c905B Cyclone 10/100/BNC at 0x2080,  00:04:76:2e:e6:e7, IRQ 11
 > >   8K buffer 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
 > >   MII transceiver found at address 24, status 782d.
 > >   Using bus-master transmits and whole-frame receives.
 > 152,161c148,150
 > < PCI: Found IRQ 11 for device 00:0d.0
 > < 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
 > < See Documentation/networking/vortex.txt
 > < 00:0d.0: 3Com PCI 3c905B Cyclone 10/100/BNC at 0x2080. Vers LK1.1.18-ac
 > <  00:04:76:2e:e6:e7, IRQ 11
 > <   product code 4d52 rev 00.0 date 02-05-01
 > <   Internal config register is 1000000, transceivers 0x3a.
 > <   8K byte-wide RAM 5:3 Rx:Tx split, autoselect/10baseT interface.
 > <   Enabling bus-master transmits and whole-frame receives.
 > < 00:0d.0: scatter/gather enabled. h/w checksums enabled
 > ---
 > > pci-scan.c:v1.12 7/30/2003  Donald Becker <becker at scyld.com>
 > http://www.scyld.com/linux/drivers.html
 > > 3c59x.c:v0.99Za 4/17/2003 Donald Becker, becker at scyld.com
 > >   http://www.scyld.com/network/vortex.html
 > 162a152,155
 > > eth0: 3Com 3c905B Cyclone 10/100/BNC at 0x2080,  00:04:76:2e:e6:e7, IRQ 11
 > >   8K buffer 5:3 Rx:Tx split, autoselect/10baseT interface.
 > >   MII transceiver found at address 24, status 780d.
 > >   Using bus-master transmits and whole-frame receives.

You patched your tree with Don Beckers drivers ?
If so, this is a problem you need to take to him.

		Dave





More information about the fedora-list mailing list