SCSI problem - Adaptec AHA-2940UW adapter in Compac Professional Workstation AP200

[Alexander Dalloz]

Am Mi, den 03.03.2004 schrieb Johnny Smith um 20:10:
> Hi James, 
> 
> Thanks for the help.
> 
> I do have a 'bootable' SCSI hard drive. 
> Do I have to install/upgrade the SCSI bios ?

No, you haven't.

> How ?  Where to get it?

cat /proc/scsi/scsi

This should print you out the attached devices. In /proc/scsi you find
more information about your SCSI subsystem.
I suspect you run Fedora on the SCSI harddrive. Run "sane-find-scanner"
to see if the sane backend finds your scanner. The HP4C is well
supported.

Your system should load the kernel module named aic7xxx for your
adapter. Run "lsmod | grep aic".

> Many thanks again for your assistance
> 
> Johnny

Alexander


-- 
Alexander Dalloz | Enger, Germany | GPG key 1024D/ED695653 1999-07-13
Fedora GNU/Linux Core 1 (Yarrow) on Athlon CPU kernel 2.4.22-1.2174.nptl
Sirendipity 22:30:32 up 13 days, 4 users, load average: 0.47, 0.44, 
                   [ Γνωθι σ'αυτον - gnothi seauton ]