lm_sensors

[Craig]

OK, I know people have talked/questioned/answered this before but the 
archives are down again and I can't for the life of me remember (I'm 
having a mental meltdown today) what I need to do. When booting up the 
lm_sensors fail because it can't find /proc:

Mar  4 13:18:23 alopa lm_sensors: Starting up sensors:
Mar  4 13:18:23 alopa kernel: to serial-pci-info at lists.sourceforge.net.
Mar  4 13:18:23 alopa kernel: ttyS04 at port 0xd400 (irq = 16) is a 16550A
Mar  4 13:18:23 alopa kernel: Real Time Clock Driver v1.10e
Mar  4 13:18:23 alopa kernel: floppy0: no floppy controllers found
Mar  4 13:18:23 alopa kernel: NET4: Frame Diverter 0.46
Mar  4 13:18:23 alopa kernel: RAMDISK driver initialized: 16 RAM disks 
of 4096K size 1024 blocksize
Mar  4 13:18:23 alopa kernel: Uniform Multi-Platform E-IDE driver 
Revision: 7.00beta4-2.4
Mar  4 13:18:23 alopa kernel: ide: Assuming 33MHz system bus speed for 
PIO modes; override with idebus=xx
Mar  4 13:18:23 alopa lm_sensors: Can't access /proc file
Mar  4 13:18:23 alopa kernel: VP_IDE: IDE controller at PCI slot 00:0f.1
Mar  4 13:18:23 alopa kernel: VP_IDE: chipset revision 6
Mar  4 13:18:23 alopa kernel: VP_IDE: not 100%% native mode: will probe 
irqs later
Mar  4 13:18:23 alopa lm_sensors:
Mar  4 13:18:23 alopa kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 
controller on pci00:0f.1
Mar  4 13:18:23 alopa lm_sensors: Unable to find i2c bus information;
Mar  4 13:18:23 alopa kernel:     ide0: BM-DMA at 0x9000-0x9007, BIOS 
settings: hda:DMA, hdb:DMA
Mar  4 13:18:23 alopa lm_sensors: For 2.6 kernels, make sure you have 
mounted sysfs!
Mar  4 13:18:23 alopa kernel:     ide1: BM-DMA at 0x9008-0x900f, BIOS 
settings: hdc:DMA, hdd:DMA
Mar  4 13:18:23 alopa lm_sensors: For older kernels, make sure you have 
done 'modprobe i2c-proc'!
Mar  4 13:18:23 alopa kernel: hda: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
Mar  4 13:18:23 alopa rc: Starting lm_sensors:  failed

Yes, I have both 2.4 and 2.6 kernels. Yes, I do have /sys and I have 
inserted the sysfs in fstab. I know I have to edit something else to get 
the lm_sensors to work, but I can't remember what.

Craig