NIC problems after upgrading to fc5
William Yardley
fedora-list at veggiechinese.net
Mon Mar 27 18:04:31 UTC 2006
On Sat, Mar 25, 2006 at 02:14:13PM -0800, William Yardley wrote:
> After upgrading to FC5, I am getting the error:
> tulip_stop_rxtx() failed
>
> repeatedly in dmesg / kernel log output, and my network card won't come
> up. The machine worked Ok after the initial kernel upgrade, but after
> doing an upgrade (via yum), I can't get the network card to work (either
> via DHCP or by manual configuration).
I "fixed" for now by swapping NICs - maybe not a real fix, but a lot
more fun than spending hours fixing it for reals.
btw, if it's helpful to anyone in figuring out what's going on here:
$ hal-device
[...]
41: udi = '/org/freedesktop/Hal/devices/pci_1282_9102'
info.udi = '/org/freedesktop/Hal/devices/pci_1282_9102' (string)
linux.subsystem = 'pci' (string)
linux.hotplug_type = 1 (0x1) (int)
pci.subsys_product = 'Unknown (0x434e)' (string)
pci.subsys_vendor = 'Unknown (0x4554)' (string)
info.product = '21x4x DEC-Tulip compatible 10/100 Ethernet' (string)
pci.product = '21x4x DEC-Tulip compatible 10/100 Ethernet' (string)
info.vendor = 'Davicom Semiconductor, Inc.' (string)
pci.vendor = 'Davicom Semiconductor, Inc.' (string)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.device_class = 2 (0x2) (int)
pci.subsys_vendor_id = 17748 (0x4554) (int)
pci.subsys_product_id = 17230 (0x434e) (int)
pci.vendor_id = 4738 (0x1282) (int)
pci.product_id = 37122 (0x9102) (int)
info.linux.driver = 'tulip' (string)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.0' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e' (string)
info.bus = 'pci' (string)
linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.0' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:02.0' (string)
$ lsmod | grep tulip:
tulip 46817 0
$ lspci
00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge (rev 11)
00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge (rev 11)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
02:02.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31)
Dmesg:
Linux version 2.6.15-1.2054_FC5 (bhcompile at hs20-bc1-3.build.redhat.com) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-3)) #1 Tue Mar 14 15:48:33 EST 2006
[...]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
[...]
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0c: ioport range 0x400-0x47f could not be reserved
pnp: 00:0c: ioport range 0x680-0x6ff has been reserved
pnp: 00:0c: ioport range 0x480-0x4bf has been reserved
[...]
Linux Tulip driver version 1.1.13 (May 11, 2002)
intel8x0_measure_ac97_clock: measured 53995 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 16
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
tulip0: Index #1 - Media 10baseT (#0) described by a 21140 non-MII (0) block.
tulip0: Index #2 - Media 100baseTx (#3) described by a 21140 non-MII (0) block.
tulip0: Index #3 - Media 10baseT-FDX (#4) described by a 21140 non-MII (0) block.
tulip0: Index #4 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) block.
tulip0: MII transceiver #1 config 3100 status 7809 advertising 01e1.
eth0: Davicom DM9102/DM9102A rev 49 at e0868c00, 00:08:A1:1F:AA:DC, IRQ 16.
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
[...]
0000:02:02.0: tulip_stop_rxtx() failed
0000:02:02.0: tulip_stop_rxtx() failed
0000:02:02.0: tulip_stop_rxtx() failed
0000:02:02.0: tulip_stop_rxtx() failed
eth0: no IPv6 routers present
0000:02:02.0: tulip_stop_rxtx() failed
0000:02:02.0: tulip_stop_rxtx() failed
0000:02:02.0: tulip_stop_rxtx() failed
More information about the fedora-list
mailing list