[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: New Kernel still bad



Erich Zigler wrote:
On Wed, 01 Aug 2007 05:30:22 -0600 Karl Larsen <k5di zianet com> wrote:

	Yesterday I yummed the updates and they included removing the
last updated kernel and installed a new one called 2.6.22.1-33.fc7
which I hoped is better than the one it replaced.
	So I stuck my trusty 2 GB USB storage device into a USB port
and the Hard Drive moved but the firewire things just didn't do the
normal things. I got no listing of the files on it and no symbol on
my desktop that shows it is mounted. I will stay with the new kernel
today and see if I can find other things that stopped working.

Karl,
Is this device a USB device or a Firewire device?

It was my guess that USB uses Firewire. I can be wrong. The device is a tiny sim in a plastic housing with a USB male plug.

Also after plugging
in the device open up a terminal and execute the command

dmesg

What does the last 5-10 lines say?

Thanks,

Erich

Here is dmesg:

usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 3:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
sd 3:0:0:0: [sdg] 4030464 512-byte hardware sectors (2064 MB)
sd 3:0:0:0: [sdg] Write Protect is off
sd 3:0:0:0: [sdg] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sdg] Assuming drive cache: write through
sd 3:0:0:0: [sdg] 4030464 512-byte hardware sectors (2064 MB)
sd 3:0:0:0: [sdg] Write Protect is off
sd 3:0:0:0: [sdg] Mode Sense: 23 00 00 00
sd 3:0:0:0: [sdg] Assuming drive cache: write through
 sdg: sdg1
sd 3:0:0:0: [sdg] Attached SCSI removable disk
sd 3:0:0:0: Attached scsi generic sg8 type 0
usb 4-6: USB disconnect, address 3
usb 4-6: new high speed USB device using ehci_hcd and address 4
usb 4-6: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: [sdg] 4030464 512-byte hardware sectors (2064 MB)
sd 4:0:0:0: [sdg] Write Protect is off
sd 4:0:0:0: [sdg] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdg] Assuming drive cache: write through
sd 4:0:0:0: [sdg] 4030464 512-byte hardware sectors (2064 MB)
sd 4:0:0:0: [sdg] Write Protect is off
sd 4:0:0:0: [sdg] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdg] Assuming drive cache: write through
 sdg: sdg1
sd 4:0:0:0: [sdg] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg8 type 0
[karl k5di ~]$



--

	Karl F. Larsen, AKA K5DI
	Linux User
	#450462   http://counter.li.org.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]