Problems with Xorg restarting after KDE logout

[Martin Marques]

Ed Greshko escribió:
> Martin Marques wrote:
>> I've experienced problems with logouts (any user) on my FC6. Basically,
>> X crashes and I end up in a terminal. From there I can start X again
>> without a problem but on logout I don't get the kdm login screen.
>>
>> Looking at the logs I found something very peculiar:
>>
>> When starting X and kdm ffom boot I see this in the Xorg.0.log:
>>
>> (II) SAVAGE(0): [drm] bpp: 32 depth: 24
>> (II) SAVAGE(0): [drm] Sarea 2200+284: 2484
>> drmOpenDevice: node name is /dev/dri/card0
>> drmOpenDevice: open result is -1, (No such device or address)
>> drmOpenDevice: open result is -1, (No such device or address)
>> drmOpenDevice: Open failed
>> drmOpenDevice: node name is /dev/dri/card0
>> drmOpenDevice: open result is -1, (No such device or address)
>> drmOpenDevice: open result is -1, (No such device or address)
>> drmOpenDevice: Open failed
>> drmOpenByBusid: Searching for BusID pci:0000:01:00.0
>> drmOpenDevice: node name is /dev/dri/card0
>> drmOpenDevice: open result is 6, (OK)
>> drmOpenByBusid: drmOpenMinor returns 6
>> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
>> (II) SAVAGE(0): [drm] loaded kernel module for "savage" driver
>> (II) SAVAGE(0): [drm] DRM interface version 1.3
>> (II) SAVAGE(0): [drm] created "savage" driver at busid "pci:0000:01:00.0"
>> (II) SAVAGE(0): [drm] added 8192 byte SAREA at 0xe00fd000
>> (II) SAVAGE(0): [drm] mapped SAREA 0xe00fd000 to 0xb7f11000
>> (II) SAVAGE(0): [drm] framebuffer handle = 0xd0000000
>> (II) SAVAGE(0): [drm] added 1 reserved context for kernel
>> (II) SAVAGE(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3116; Card
>> 0x5333/0x8d04]
>>
>> But when I logout and X has to restart I get this:
>>
>> (II) SAVAGE(0): [drm] bpp: 32 depth: 24
>> (II) SAVAGE(0): [drm] Sarea 2200+284: 2484
>> drmOpenDevice: node name is /dev/dri/card0
>> drmOpenDevice: open result is 6, (OK)
>> drmOpenDevice: node name is /dev/dri/card0
>> drmOpenDevice: open result is 6, (OK)
>> drmOpenByBusid: Searching for BusID pci:0000:01:00.0
>> drmOpenDevice: node name is /dev/dri/card0
>> drmOpenDevice: open result is 6, (OK)
>> drmOpenByBusid: drmOpenMinor returns 6
>> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
>> (II) SAVAGE(0): [drm] DRM interface version 1.0
>> (II) SAVAGE(0): [drm] drmSetBusid failed (6, pci:0000:01:00.0),
>> Permission denied
>> (EE) SAVAGE(0): [drm] DRIScreenInit failed.  Disabling DRI.
>> (EE) SAVAGE(0): DRI isn't enabled
>>
>> Now, two things come up from here:
>>
>> 1) In the first boot it's using version 1.3 of DRM interface, while at
>> restart it uses 1.0. What can be wrong?
>> 2) There seems to be a permission error when trying to access the SAVAGE
>> card at the busid specified.
>>
>> Any clues?
> 
> Maybe following the procedures in this link will help?
> 
> http://dri.freedesktop.org/wiki/DriTroubleshooting

Ed, this doesn't help me as X comes up OK, but after a logout out it 
tries to start in a different manner, and then is when it fails.

-- 
select 'mmarques' || '@' || 'unl.edu.ar' AS email;
---------------------------------------------------------
Martín Marqués          |   Programador, DBA
Centro de Telemática	|     Administrador
                Universidad Nacional
                     del Litoral
---------------------------------------------------------