laptop fc7 with NetworkManager couldnt find wired ip

Dave Burns tburns at hawaii.edu
Wed Jun 4 18:21:57 UTC 2008


There is a weird incompatibility between NetworkManager and network,
not well documented anywhere I know about. I am in a similar position,
can use either wirelesss or wired but have to do a whole reconfig to
switch between the two. I'd explain it to you if I understood it.
Dave

On Mon, Jun 2, 2008 at 7:07 AM, jackson byers <byersjab at gmail.com> wrote:
> on new laptop, with fc7
> NetworkManager in charge
> couldnt get on network with wired connection to router
> ifconfig kept giving    eth0  169.254.xxxx
>
> finally from google search on 169.
>  DHCP Considerations
>
> DHCP clients automatically give their NICs and IP address starting
> with 169.254.x.x until they can make contact with their DHCP server.
> When contact is made they reconfigure their IP addresses to the values
> provided by the DHC server. An interface with a 169.254.x.x address
> signifies a failure to communicate with the DHCP server. Check your
> cabling, routing and DHCP server configuration to rectify such a
> problem.
>
> ok at least then i knew the 169.xx was a standard
> but i was prettty sure my wiring was ok
> basically dslmodem-linksysrouter- lanside
> - 2desktops static ips working for years, fc5 and an imacg5.
>
> But now the fc7 laptop also wired connecition, but trying to connect via dhcp
> which was evidently my problem.
>
> Maybe not surprising since I have been strictly static ip based up until now.
> It has been years since i did any configure steps on the router
> and i have probably misplaced any cd that came with it.
> So i wasnt at all sure at how to go about trying to "wake up" my router
> to dhcp requests
>
> I finally found in carla schroder linux cookbook a complete example
> for "setting up a dhcp server" which i used on the laptop,
> altho i wasnt at all sure this would help me "wake up" my router to
> dhcp requests.
>  I put in following file
>
> [root at r3-mobile etc]# cat dhcpd.conf
>
> default-lease-time 259200;
> max-lease-time 518400;
>
> subnet 192.168.2.0 netmask 255.255.255.0 {
>  option subnet-mask 255.255.255.0;
>  option broadcast-address 192.168.2.255;
>  option routers 192.168.2.1;
>  range 192.168.2.90 192.168.2.150;
>  option domain-name-servers 206.13.28.12 206.13.31.12;
> }
>
> (As an aside, I would  _never_  have figured out all of that syntax from
> the various dhcp,dhclient ....   man pages)
>
>
> and rebooted the laptop
> I had to fuss a bit more:
> in order for eth0 to get its new dhcp assigned ip, it
> seemed to also require taking the ethernet cable out and back in.
> But now the laptop is on the net with dhcp working, and surviving reboots.
>
> Questions:
> 1)Is what i did overkill?  I think it means i made the laptop itself
> the dhcp server.
> Its working, but i would like some feedback from the list
>
> 2) what steps would i need to instead try to kick the router into
> doing the dhcp?
> Several months ago my vendor had me jumping thru hoops using dhclient
> and some combo, including taking cable out/back in,
> eventually got the wired eth0 working.
> But then family health problemsetc intervened and I just abandoned the laptop
> until now.
> Any hints re use of dhclient?
>
> 3) any one else needing to take ethernet cables out and then back in to
> make connections come alive?
>
> any/all comments appreciated
> Jack
>
> --
> fedora-list mailing list
> fedora-list at redhat.com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>




More information about the fedora-list mailing list