SSH in/out extremely slow(PAINFUL) FC2

[Sean Bruno]

I will attempt to update the kernel on the machine in question to the
latest 2.6.4 release and see if my issues clear.  Ty all who replied.

On Sat, 2004-04-03 at 16:14, Sean Bruno wrote:
> Output of ethool:
> 
> Settings for eth0:
>         Supported ports: [ MII ]
>         Supported link modes:   10baseT/Half 10baseT/Full
>                                 100baseT/Half 100baseT/Full
>                                 1000baseT/Half 1000baseT/Full
>         Supports auto-negotiation: Yes
>         Advertised link modes:  10baseT/Half 10baseT/Full
>                                 100baseT/Half 100baseT/Full
>                                 1000baseT/Half 1000baseT/Full
>         Advertised auto-negotiation: Yes
>         Speed: 100Mb/s
>         Duplex: Full
>         Port: Twisted Pair
>         PHYAD: 1
>         Transceiver: internal
>         Auto-negotiation: on
>         Supports Wake-on: g
>         Wake-on: d
>         Current message level: 0x000000ff (255)
>         Link detected: yes
> 
> This appears to match my ethernet switch.  BTW, this is a Broadcom using
> the tg3 driver.
> 
> On Sat, 2004-04-03 at 16:06, Charles R. Anderson wrote:
> > On Sat, Apr 03, 2004 at 04:01:30PM -0800, Sean Bruno wrote:
> > > Interesting followup on this one.
> > > 
> > > Ping is returning a time of 15ms with is within tolerance of another
> > > machine sitting on the same physical and logical network.
> > 
> > What speed/duplex is eth0 negotiated to?
> > 
> > /sbin/ethtool eth0
> > 
> > Does that match what the switch port negotiated to?
> -- 
> Sean Bruno
> Telecommunications Engineer
> Metro One Telecommunications
> Desk (503)524-1632
> Cell (503)358-6832
-- 
Sean Bruno
Telecommunications Engineer
Metro One Telecommunications
Desk (503)524-1632
Cell (503)358-6832