ALSA & CS4235

[Fred New]

Can someone tell me how to configure my (ancient, onboard, ISA) CS4235
sound device?  Under FC1 using sndconfig, this used the cs4232 driver,
but the ALSA documentation indicates that I want the cs4236 driver.  All
of my attempts with "modprobe snd-cs4236" have resulted in "device not
detected" (or something like that).

Which package should I bugzilla against that this didn't get configured
by the installation?  (Assuming the driver works.)

For what it's worth, here's some seemingly related information in
/sys/devices/pnp0/00:01/00:01.00/options:

Dependent: 01 - Priority preferred
   port 0x534-0x534, align 0x3, size 0x4, 16-bit address decoding
   port 0x388-0x388, align 0x7, size 0x4, 16-bit address decoding
   port 0x220-0x220, align 0x1f, size 0x10, 16-bit address decoding
   irq 5 High-Edge
   dma 1 8-bit byte-count compatible
   dma 0,3 8-bit byte-count compatible
Dependent: 02 - Priority acceptable
   port 0x534-0xffc, align 0x3, size 0x4, 16-bit address decoding
   port 0x388-0x388, align 0x7, size 0x4, 16-bit address decoding
   port 0x220-0x260, align 0x1f, size 0x10, 16-bit address decoding
   irq 3,4,5,7,10,11 High-Edge
   dma 1,3 8-bit byte-count compatible
   dma 0,1,3 8-bit byte-count compatible

And here's what sndconfig used to put in modules.conf:

alias sound-slot-0 cs4232
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L
>/dev/null 2>&1
|| :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S
>/dev/null 2>&1 || :
options sound dmabuf=1
alias synth0 opl3
options opl3 io=0x388
options cs4232 isapnp=1

Thanks in advance,
Fred New