HP Scanjet 6200C not working with usblib

[Hay Bouten]

Hi list,

My HP Scanjet 6200C is not working with kernel 2.6.3-2.1.253.

The module usb scanner has gone and now it all should work with usblib,
but it doesn't.

When I have a look into /var/log/messages I see:

> drivers/usb/core/usb.c: registered new driver usbfs
> drivers/usb/core/usb.c: registered new driver hub
> USB Universal Host Controller Interface driver v2.2
> uhci_hcd 0000:00:1f.2: UHCI Host Controller
> uhci_hcd 0000:00:1f.2: irq 5, io base 0000b400
> uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> uhci_hcd 0000:00:1f.4: UHCI Host Controller
> uhci_hcd 0000:00:1f.4: irq 9, io base 0000b000
> uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> usb 1-1: new full speed USB device using address 2

So to me that looks like the kernel is finding 2 USB Hubs and 1 USB
device. This is according to my hardware setup.

sane-find-scanner displays:
> found USB scanner (vendor=0x03f0, product=0x0201) at libusb:001:002

scanimage -L displays:
> device `hp:libusb:001:002' is a Hewlett-Packard ScanJet 62x0C flatbed 
> scanner

When I start xsane it doesn't detect the scanner the first time. When I
give it a second try it detects something. The system then is getting
very sluggish and in the /var/log/messages I see:

> kernel: usb 1-1: control timeout on ep0out
> usb.agent[2829]: ... no modules for USB product 3f0/201/100

This messages are repeated over and over. Xsane doesn't work but it
seams to be starting. It displays the first screen after after 45 sec.

Ran this al as root so that I don't have to chmod the
/proc/bus/usb/001/002 every time. As a normal user I get the same
problems.

Can anybody help. All the help from last week didn't to the trick.

Thanks,
Hay