[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Unable to complie IT8212F ATA133 drivers



I used the one for the 2.6 kernel. Someone sent me an email saying it doesn't
build with the new kernels, and I followed the directions here:
http://www.passys.nl/tips/ite_kernel_image_compile.txt

This worked except the computer froze when I ran modprobe on the module, then
unforze, then froze again. /var/log/messages showed:

May  7 23:57:06 localhost kernel: scsi2 : ITE RAIDExpress133
May  7 23:57:06 localhost kernel:   Vendor: ITE       Model: IT8212F          
Rev: 1.3 
May  7 23:57:06 localhost kernel:   Type:   Direct-Access                     
ANSI SCSI revision: 00
May  7 23:57:06 localhost kernel: SCSI device sda: 234441648 512-byte hdwr
sectors (120034 MB)
May  7 23:57:06 localhost kernel: sda: asking for cache data failed
May  7 23:57:06 localhost kernel: sda: assuming drive cache: write through
May  7 23:57:16 localhost scsi.agent[3079]: Attribute
/sys/devices/platform/host2/2:0:1:0/type does not exist
May  7 23:57:19 localhost kernel:  sda:<6> hdb: hdb4



May  8 00:35:26 localhost kernel: Found Controller: IT8212 UDMA/ATA133 RAID
Controller
May  8 00:35:26 localhost kernel: IssueIdentify: Resetting channel.
May  8 00:35:26 localhost kernel: IssueIdentify (IDE): Disk[0] not ready.
Status=0x20
May  8 00:35:26 localhost kernel: Device 0 is not present
May  8 00:35:26 localhost kernel: IssueIdentify: Resetting channel.
May  8 00:35:26 localhost kernel: IssueIdentify (IDE): Disk[1] not ready.
Status=0x30
May  8 00:35:26 localhost kernel: Device 1 is not present
May  8 00:35:26 localhost kernel: Channel[0] BM-DMA at 0xBC00-0xBC07
May  8 00:35:26 localhost kernel: IssueIdentify: Resetting channel.
May  8 00:35:26 localhost kernel: IssueIdentify (IDE): Disk[0] not ready.
Status=0x20
May  8 00:35:26 localhost kernel: Device 2 is not present
May  8 00:35:26 localhost kernel: IssueIdentify: Resetting channel.
May  8 00:35:26 localhost kernel: IssueIdentify (IDE): Disk[1] not ready.
Status=0x30
May  8 00:35:26 localhost kernel: Device 3 is not present
May  8 00:35:26 localhost kernel: Channel[1] BM-DMA at 0xBC08-0xBC0F
May  8 00:35:26 localhost kernel: scsi2 : ITE RAIDExpress133


--- Markku Kolkka <markkukolkka kolumbus fi> wrote:
> Brian Bober kirjoitti viestissään (lähetysaika perjantai, 7. 
> toukokuuta 2004 06:24):
> > I'm trying to compile the IT8212F ATA133 drivers
> > (LinuxSrc_it8212_092005-05.zip) from
> > http://www.ite.com.tw//productInfo/Download.html
> 
> That version is for 2.4 kernels only, the driver with 2.6.x 
> support is further down the download page.
> 
> -- 
> 	Markku Kolkka
> 	markku kolkka iki fi
> 
> 
> -- 
> fedora-test-list mailing list
> fedora-test-list redhat com
> To unsubscribe: 
> http://www.redhat.com/mailman/listinfo/fedora-test-list



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]