[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

FC2 test3 x86_64 ATI 9600 dual head support





Date: Sun, 9 May 2004 22:18:12 +0200
From: Eugen Leitl <eugen leitl org>
Subject: FC2 test3 x86_64 ATI 9600 dual head support
To: fedora-test-list redhat com
Message-ID: <20040509201812 GN25728 leitl org>
Content-Type: text/plain; charset="us-ascii"

Howdy,

just installed FC test 3 x86_64 on an Athlon 64 Asus K8V SE Deluxe (using
onboard SATA host adaptor (no RAID), and a WD 36 GByte SATA drive). No
problems so far, but for lack of dual-head support with ATI Radeon 9600.

I see from the archives other people did succeed. Can anyone send me a
working xorg.conf for a dual-head setup? Thanks!




This one works for a ATI Radeon 9700 Pro, AOC Spectrum (1600x1200 @ 75hz) and Philips 107S (1152x864 @ 75hz)
# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "Multihead layout"
	Screen      0  "Screen0" RightOf "Screen1"
	Screen      1  "Screen1" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	Option	    "Xinerama" "on"
	Option	    "Clone" "off"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the 
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	FontPath     "unix/:7100"
EndSection

Section "Module"
	Load  "dbe"
	Load  "extmod"
	Load  "fbdevhw"
	Load  "glx"
	Load  "record"
	Load  "freetype"
	Load  "type1"
	Load  "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#	Option	"Xleds"		"1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#	Option	"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#	Option	"XkbModel"	"pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#	Option	"XkbModel"	"microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#	Option	"XkbLayout"	"de"
# or:
#	Option	"XkbLayout"	"de"
#	Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#	Option	"XkbOptions"	"ctrl:swapcaps"
# Or if you just want both to be control, use:
#	Option	"XkbOptions"	"ctrl:nocaps"
#
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "be"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "IMPS/2"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5"
	Option	    "Emulate3Buttons" "yes"
EndSection

Section "Monitor"

 ### Uncomment if you don't want to default to DDC:
 ### Uncomment if you don't want to default to DDC:
	HorizSync    30.0 - 75.0
	VertRefresh  50.0 - 130.0
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "AOC SPECTRUM 7Glr & 7GlrA"
	DisplaySize  360	270
 ### Uncomment if you don't want to default to DDC:
#	HorizSync    30.0 - 95.0
#	VertRefresh  50.0 - 160.0
	Option	    "dpms"
EndSection

Section "Monitor"

 ### Uncomment if you don't want to default to DDC:
#	HorizSync    30.0 - 85.0
#	VertRefresh  50.0 - 130.0
	Identifier   "Monitor1"
	VendorName   "Monitor Vendor"
	ModelName    "AOC SPECTRUM 7Glr & 7GlrA"
 ### Uncomment if you don't want to default to DDC:
#	HorizSync    0.0 - 0.0
#	VertRefresh  0.0 - 0.0
	Option	    "dpms"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "radeon"
	VendorName  "Videocard vendor"
	BoardName   "ATI Radeon 9700 Pro"
EndSection

Section "Device"
	Identifier  "Videocard1"
	Driver      "radeon"
	VendorName  "Videocard Vendor"
	BoardName   "ATI Radeon 9700 Pro"
	BusID       "PCI:1:0:0"
	Screen      1
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	Monitor    "Monitor0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "Screen1"
	Device     "Videocard1"
	Monitor    "Monitor1"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1600x1200" "1152x864"
	EndSubSection
EndSection

Section "DRI"
	Group        0
	Mode         0666
EndSection


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]