[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Panasonic CF-R1 won't boot with install kernel crash



Yeah USB has some bad probs in 2.6.5, like trying to rmmod usb modules
only to have rmmod hang and having the process unkillable until
reboot...

-sb

On Sun, 2004-05-16 at 12:58, Phil Schaffner wrote:
> On Sat, 2004-05-15 at 15:12 +0900, Makoto Fujiwara wrote:
> > snip <
> > 
> > I have copied vmlinuz and initd.img from boot.iso (May 12 version) on
> > my CD-ROM, have /etc/grub.conf lines pointing those two on /,
> > unplug USB CDROM-drive and reboots.
> > 
> > It works. Installer screen asking language appears.
> > ( I did not go further from that point yet. Should I to that ?
> > I need CDROM drive only when upgrade I guess.)
> 
> Even upgrade can be done via network, but hopefully USB problems will be
> fixed soon.  At this point I'd wait for FC2 final and do a clean
> install.  At least that appears to be possible without the USB CD-ROM.
> 
> > 
> > Phil> Output of lspci under FC1 would also be of interest.
> > 
> > It's here: (CDROM unplugged)
> > 00:00.0 Host bridge: Intel Corp. 82440MX Host Bridge (rev 01)
> > 00:00.1 Multimedia audio controller: Intel Corp. 82440MX AC'97 Audio Controller
> > 00:02.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev c1)
> > 00:03.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 88)
> > 00:03.1 System peripheral: Ricoh Co Ltd: Unknown device 0575
> > 00:04.0 Communication controller: Matsushita Electric Industrial Co., Ltd.: Unknown device 8339
> > 00:07.0 ISA bridge: Intel Corp. 82440MX ISA Bridge (rev 01)
> > 00:07.1 IDE interface: Intel Corp. 82440MX EIDE Controller
> > 00:07.2 USB Controller: Intel Corp. 82440MX USB Universal Host Controller
> > 00:07.3 Bridge: Intel Corp. 82440MX Power Management Controller
> > 00:09.0 Modem: PCTel Inc HSP MicroModem 56 (rev 02)
> > 00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
> > 
> > Plugging USB CDROM drive makes no change at all for above.
> > I think following line is for Wireless LAN Card:
> >  00:03.1 System peripheral: Ricoh Co Ltd: Unknown device 0575
> > Following is SD memory slot, probably
> >  00:04.0 Communication controller: Matsushita Electric... Unknown device 8339
> 
> Should be added to your Bugzilla entry.
> 
> Good luck with FC2.
> 
> Phil
> 
> 

Attachment: signature.asc
Description: This is a digitally signed message part


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]