What is the status of ide-scsi these days ? (Can't shutdown)
Kim Lux
lux at diesel-research.com
Fri Nov 12 23:16:50 UTC 2004
Here is your info, Peter. I shortened it because it got rejected by the
server the first time.
On Fri, 2004-11-12 at 14:30 -0700, Kim Lux wrote:
> On Fri, 2004-11-12 at 14:21 -0500, Peter Jones wrote:
> > On Fri, 2004-11-12 at 07:48 -0700, Kim Lux wrote:
> > > My CDROM isn't broken. It worked perfect under FCs and it still works
> > > perfect under Windows. There is a bug in FC3 final. There is nothing
> > > wrong with my cdrom drive.
> >
> > That is yet to be determined. Could you answer the questions I asked?
> > --
> > Peter
>
>
> >Well, it'd be cdparanoia and/or kernel. What kind of drive did you say
> >this was?
>
> It is the 4x DVD+rw CDRW that comes with an HPzd7000 laptop.
>
> >From syslogs:
>
> Nov 11 19:50:12 localhost kernel: hda: hda1 hda2 hda3 hda4 < hda5 >
> Nov 11 19:50:12 localhost kernel: hdc: ATAPI 24X DVD-ROM CD-R/RW drive,
> 2048kB Cache, DMA
> Nov 11 19:50:12 localhost kernel: Uniform CD-ROM driver Revision: 3.20
>
>
> >From kernel logs:
> ide0: BM-DMA at 0x2040-0x2047, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0x2048-0x204f, BIOS settings: hdc:DMA, hdd:pio
> Probing IDE interface ide0...
> hda: HTS548080M9AT00, ATA DISK drive
> Using cfq io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> hdc: HL-DT-ST DVD+RW GCA-4040N, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> Probing IDE interface ide2...
> ide2: Wait for ready failed before probe !
> Probing IDE interface ide3...
> ide3: Wait for ready failed before probe !
> Probing IDE interface ide4...
> ide4: Wait for ready failed before probe !
> Probing IDE interface ide5...
> ide5: Wait for ready failed before probe !
> hda: max request size: 1024KiB
> hda: 156301488 sectors (80026 MB) w/7877KiB Cache, CHS=16383/255/63,
> UDMA(100)
> hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 >
> hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
> Uniform CD-ROM driver Revision: 3.20
>
>
> And which kernel and cdparanoia versions?
>
> $ uname -a
> Linux localhost.localdomain 2.6.9-1.667 #1 Tue Nov 2 14:41:25 EST 2004
> i686 i686 i386 GNU/Linux
>
> $ rpm -q cdparanoia
> cdparanoia-alpha9.8-24
>
> > Just to be sure I'm correct above, open a shell and do this:
> > mkdir scratch
> > cd scratch
> > cdparanoia -B
> > That should rip the CD. If it's something in either the grip code to
> > get the table of contents and discid info, or something along those
> > lines, it could be grip's fault. If it happens with this, that's not
> > the necessarily the case.
>
>
> First of all, I had to reboot to get the CDROM to open. After reboot, I
> proceeded as follows. Note that I am NOT using ide-scsi.
>
>
> $ cdparanoia -vB 9-
> cdparanoia III release 9.8 (March 23, 2001)
> (C) 2001 Monty <monty at xiph.org> and Xiphophorus
>
> Report bugs to paranoia at xiph.org
> http://www.xiph.org/paranoia/
>
> Checking /dev/cdrom for cdrom...
> DMA scatter/gather table entries: 1
> table entry size: 131072 bytes
> maximum theoretical transfer: 55 sectors
> Setting default read size to 24 sectors (56448 bytes).
>
>
> CDROM model sensed sensed: HL-DT-ST DVD+RW GCA-4040N 1.17
>
>
> Checking for SCSI emulation...
> Drive is ATAPI (using SCSI host adaptor emulation)
>
> Checking for MMC style command set...
> Drive is MMC style
> Verifying CDDA command set...
> Expected command set reads OK.
>
> Table of contents (audio tracks only):
> track length begin copy pre ch
> ===========================================================
> 1. 14715 [03:16.15] 0 [00:00.00] no no 2
> 2. 18225 [04:03.00] 14715 [03:16.15] no no 2
> 3. 11472 [02:32.72] 32940 [07:19.15] no no 2
> 4. 24265 [05:23.40] 44412 [09:52.12] no no 2
> 5. 11640 [02:35.15] 68677 [15:15.52] no no 2
> 6. 15755 [03:30.05] 80317 [17:50.67] no no 2
> 7. 15493 [03:26.43] 96072 [21:20.72] no no 2
> 8. 14462 [03:12.62] 111565 [24:47.40] no no 2
> 9. 11663 [02:35.38] 126027 [28:00.27] no no 2
> 10. 14002 [03:06.52] 137690 [30:35.65] no no 2
> 11. 13533 [03:00.33] 151692 [33:42.42] no no 2
> 12. 11040 [02:27.15] 165225 [36:43.00] no no 2
> TOTAL 176265 [39:10.15] (audio only)
>
> Ripping from sector 126027 (track 9 [0:00.00])
> to sector 176264 (track 12 [2:27.14])
>
> outputting to track09.cdda.wav
>
> (== PROGRESS == [ > O| 130538 00 ] == :-P O
> ==)
>
> I killed it with a ctrl C here because my computer was hanging.
>
> Meanwhile, in the sys log, I am getting the following:
>
> Nov 12 14:05:18 localhost kernel: hdc: DMA timeout retry
> Nov 12 14:05:18 localhost kernel: hdc: timeout waiting for DMA
> Nov 12 14:05:23 localhost kernel: hdc: irq timeout: status=0xd0 { Busy }
> Nov 12 14:05:23 localhost kernel: hdc: irq timeout:
> error=0xd0LastFailedSense 0x0d
> Nov 12 14:05:23 localhost kernel: hdc: ATAPI reset complete
> Nov 12 14:05:31 localhost kernel: hdc: DMA timeout retry
> Nov 12 14:05:31 localhost kernel: hdc: timeout waiting for DMA
> Nov 12 14:05:36 localhost kernel: hdc: irq timeout: status=0xd0 { Busy }
> Nov 12 14:05:36 localhost kernel: hdc: irq timeout:
> error=0xd0LastFailedSense 0x0d
> Nov 12 14:05:36 localhost kernel: hdc: ATAPI reset complete
> Nov 12 14:05:43 localhost kernel: hdc: DMA timeout retry
> Nov 12 14:05:43 localhost kernel: hdc: timeout waiting for DMA
> Nov 12 14:05:48 localhost kernel: hdc: irq timeout: status=0xd0 { Busy }
> Nov 12 14:05:48 localhost kernel: hdc: irq timeout:
> error=0xd0LastFailedSense 0x0d
<snip about 100 of these messages out>
> I was, however, able to eject:
>
> eject -v /dev/hdc
> eject: device name is `/dev/hdc'
> eject: expanded name is `/dev/hdc'
> eject: `/dev/hdc' is not mounted
> eject: `/dev/hdc' is not a mount point
> eject: `/dev/hdc' is a multipartition device
> eject: trying to eject `/dev/hdc' using CD-ROM eject command
> eject: CD-ROM eject command succeeded
>
> If I re insert the CDROM and right double click the CDROM icon on the
> desktop, I get the following in and error message window:
>
> Error - kio_devices_mounthelper.
>
> /dev/hdc: Input/output error
> mount: /dev/hdc already mounted or /media/cdrecorder busy
> Please check that the disk is entered correctly.
>
> Eject still works properly after that.
>
>
> Here is what syslog says:
>
>
> Nov 12 14:22:37 localhost kernel: hdc: command error: status=0x51
> { DriveReady SeekComplete Error }
> Nov 12 14:22:37 localhost kernel: hdc: command error: error=0x50
> Nov 12 14:22:37 localhost kernel: ide: failed opcode was 100
> Nov 12 14:22:37 localhost kernel: end_request: I/O error, dev hdc,
> sector 0
> Nov 12 14:22:37 localhost kernel: Buffer I/O error on device hdc,
> logical block 0
> Nov 12 14:22:37 localhost kernel: hdc: command error: status=0x51
> { DriveReady SeekComplete Error }
> Nov 12 14:22:37 localhost kernel: hdc: command error: error=0x50
> Nov 12 14:22:37 localhost kernel: ide: failed opcode was 100
> Nov 12 14:22:37 localhost kernel: end_request: I/O error, dev hdc,
> sector 4
<snipped about 100 of these out>
> sector 68
> Nov 12 14:24:22 localhost kernel: Buffer I/O error on device hdc,
> logical block 17
> Nov 12 14:24:22 localhost kernel: hdc: command error: status=0x51
> { DriveReady SeekComplete Error }
> Nov 12 14:24:22 localhost kernel: hdc: command error: error=0x50
> Nov 12 14:24:22 localhost kernel: ide: failed opcode was 100
> Nov 12 14:24:22 localhost kernel: end_request: I/O error, dev hdc,
> sector 0
>
>
> top - 14:29:28 up 18:40, 4 users, load average: 0.03, 0.10, 0.18
> Tasks: 104 total, 1 running, 103 sleeping, 0 stopped, 0 zombie
> Cpu(s): 2.0% us, 0.3% sy, 0.0% ni, 97.3% id, 0.3% wa, 0.0% hi,
> 0.0% si
> Mem: 1034664k total, 1019128k used, 15536k free, 215208k buffers
> Swap: 1020116k total, 0k used, 1020116k free, 437024k cached
>
> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
> 3326 root 15 0 184m 35m 150m S 1.7 3.6 25:17.98 X
> 9894 krlux 15 0 31152 15m 26m S 0.3 1.5 0:00.44 kdeinit
> 9914 krlux 17 0 3128 960 1664 R 0.3 0.1 0:00.03 top
> 1 root 16 0 3572 564 1408 S 0.0 0.1 0:00.71 init
> 2 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/0
> 3 root 5 -10 0 0 0 S 0.0 0.0 0:20.43 events/0
> 4 root 5 -10 0 0 0 S 0.0 0.0 0:00.00 khelper
> 5 root 5 -10 0 0 0 S 0.0 0.0 0:02.21 kacpid
> 27 root 5 -10 0 0 0 S 0.0 0.0 0:00.00 kblockd/0
> 37 root 20 0 0 0 0 S 0.0 0.0 0:00.00 pdflush
> 38 root 15 0 0 0 0 S 0.0 0.0 0:00.15 pdflush
> 40 root 14 -10 0 0 0 S 0.0 0.0 0:00.00 aio/0
> 28 root 15 0 0 0 0 S 0.0 0.0 0:00.17 khubd
> 39 root 15 0 0 0 0 S 0.0 0.0 0:00.49 kswapd0
> 113 root 25 0 0 0 0 S 0.0 0.0 0:00.00 kseriod
> 190 root 15 0 0 0 0 S 0.0 0.0 0:00.60 kjournald
> 1063 root 6 -10 3196 512 1340 S 0.0 0.0 0:00.10 udevd
>
> ps -aux
>
> krlux 7334 0.0 0.7 65352 7880 ? Sl 07:41
> 0:01 /usr/libexec/evol
> krlux 7336 0.0 0.4 8720 4408 ? S 07:41
> 0:00 /usr/libexec/gcon
> krlux 7341 0.0 0.2 7632 2648 ? Ss 07:41
> 0:00 /usr/libexec/bono
> krlux 7342 0.0 1.4 29632 14964 ? S 07:41 0:00 kdeinit:
> kmix -se
> krlux 7344 0.0 0.7 28820 7548 ? S 07:41 0:00 kalarmd
> --login
> krlux 7347 0.0 0.5 78752 5412 ? Sl 07:41
> 0:00 /usr/libexec/evol
> krlux 7841 0.0 1.4 29888 14788 ? S 08:22 0:00 kdeinit:
> kio_uise
> krlux 9507 0.1 2.8 43956 29256 ? S 12:42 0:07 kdeinit:
> konquero
> krlux 9609 0.4 4.6 150408 48624 ? Sl 13:03 0:23 evolution
> krlux 9678 0.0 2.9 46044 30576 ? S 13:17 0:02 kdeinit:
> konquero
> krlux 9680 0.0 1.0 27736 10704 ? S 13:17 0:00 kdeinit:
> kio_file
> root 9742 0.0 0.2 6856 2088 ? S 13:53
> 0:00 /usr/libexec/gcon
> krlux 9771 0.0 1.5 31552 16104 ? S 13:59 0:00 kdeinit:
> konsole
> krlux 9772 0.0 0.1 4952 1448 pts/2 Ss+ 13:59 0:00 /bin/bash
> krlux 9826 0.0 0.6 14484 7052 ? S 14:05
> 0:00 /usr/bin/system-l
> root 9827 0.0 0.1 6024 1304 ? S 14:05
> 0:00 /usr/sbin/userhel
> root 9830 3.4 5.7 65888 59648 ? S 14:05 0:50
> python /usr/share
> krlux 9843 0.1 2.1 38604 22296 ? S 14:22 0:00 kdeinit:
> konquero
> krlux 9889 0.0 0.6 14932 7040 ? S 14:24
> 0:00 /usr/bin/system-l
> root 9890 0.0 0.1 5272 1308 ? S 14:24
> 0:00 /usr/sbin/userhel
> root 9893 3.5 2.2 28356 23028 ? S 14:25 0:11
> python /usr/share
> krlux 9894 0.8 1.5 31152 15640 ? S 14:29 0:00 kdeinit:
> konsole
> krlux 9895 0.0 0.1 4716 1448 pts/3 Ss 14:29 0:00 /bin/bash
> krlux 9915 0.0 0.0 4304 780 pts/3 R+ 14:30 0:00 ps -aux
>
>
> Let me know if you want more.
>
> --
--
Kim Lux (Mr.) Diesel Research Inc
More information about the fedora-test-list
mailing list